Publiko produktet
MVB Vertical Pool Heaters, 504A-2004A
Raypak

MVB Vertical Pool Heaters, 504A-2004A

Time-honored technologies unite with cutting-edge advancements in Raypak’s MVB modulating vertical pool heater. Small space is no longer a problem, and our compact design fits through a 32” door opening to make it the perfect choice for those hard-to-reach retrofit projects.

Features:

  • 83 to 83.3% Thermal Efficiency at Full Rate.
  • Negative vent pressure, Non-condensing Appliance.  Cat I Vent Required.
  • Bronze headers with Cupro-Nickel finned tube heat exchanger standard. ASME Section IV constructed and stamped, National Board registered.
  • CSA Low-Lead certified, less than 0.25% Lead.
  • Certified to ANSI Z21.56.
  • Minimum Continuous Inlet Water Temperature: 105°F.
  • Maximum Setpoint: 106°F.
  • On/Off Operation with Soft Start.
  • VERSA IC® Control Package with LCD Display.
  • Status Display Lights.
  • Cascade control of up to 8 units, no external sequencer required.
  • Diagnostics Center with History, English, no codes.
  • Modbus RTU BMS port (RS485).
  • 0-10 VDC BMS Interface (Setpoint or Direct Drive).
  • All models indoor/outdoor construction.
  • Certified under SCAQMD Rule 1146.2.  Meets all Low NOx regulations.
  • Engineered with precisely matched system components.
  • Smallest installed footprint (5.4 square feet) design fits tight spaces and easily replaces larger boilers.
  • 100% Factory Fire Tested.
  • Complete cabinet protects all controls and wiring. Tough, rust-resistant powder-coat finish.
  • Suitable for altitudes up to 10,000 ft. (derate above 2,000 ft.).
  • No boiler condensate drain required (proprietary design)
  • Available for natural gas or propane.
  • Integral Combustion Air Filter (MERV8).
  • Multiple Pump Outputs – Boiler Pump, System Pump.
  • Whisper-Quiet Operation.
  • Proudly Assembled in the USA.

Bypass Options:

  • The standard external bypass uses a user adjustable valve to adjust bypass flow and achieve cold-water protection.
  • All units available without an external bypass (cold-water protection provided in the field).
  • The Cold-Water Run option provides electronic control of a variable-speed pump to continuously adjust bypass flow, achieving real-time cold-water protection.

Options:

  • BACNet IP, BACnet MS/TP, Modbus TCP, N2 Metasys (B-85)
  • Lonworks (B-86)
  • Alarm with 4” Bell (E-5)
  • Low Water Cutoff (F-10)
  • Cold Water Run
  • Condensate Neutralizer (Z-12)
Özellikler
    • 83-83.3% Thermal efficiency at full rate 
    • 100% Factory fire-tested 
    • VERSA IC® Integrated controller with 7" color touchscreen display 
    • Raymote™ remote connectivity provided standard 
    • On/Off operation 
    • Full safety diagnostics with history 
    • Status display lights 
    • Cascade up to 8 heaters – no external sequencer required 
    • Maximum outlet water temperature: 180°F (82°C) 
    • Maximum pool setpoint 106°F (41°C) (104°F [40°C] default)
    • Minimum inlet water temperature: 105°F (40°C) 
    • Limited 20-year thermal shock warranty 
    • Limited 5-year primary heat exchanger warranty 
    • CSA Low-Lead certified ≤ .25% lead 
    • SCAQMD Rule 1146.2 certified, Low NOx < 20 ppm 
    • Proudly Assembled in the USA
Teknik özellikler
  • Benzersiz ref.MVB-Vertical-Pool-Heaters-504A-2004A
  • Ürün ailesiPool & Spa Products
  • Ürün grubuCommercial Pool Heaters
  • TipObje (Tekil Nesne)
  • Yayınlanma tarihi2020-10-01
  • Baskı numarası1
İlgili
  • Tasarım yeriBirleşik Devletler
  • Üretim yeriBirleşik Devletler
Sınıflandırma
  • BIMobject kategorisiHVAC - Water heaters
  • IFC sınıflandırmasıIsı Eşanjörü
  • UNSPSC adıDomestic water heaters
  • UNSPSC kodu40101825
  • Uniclass 2015 koduPr_60_60_96
  • Uniclass 2015 açıklamasıWater heaters
  • CSI MasterFormat 2014 kodu23 00 00
  • CSI MasterFormat 2014 başlığıHeating, Ventilating, and Air Conditioning (HVAC)
  • OmniClass numarası23-33 00 00
  • OmniClass başlığıHVAC Specific Products and Equipment
  • CSI UniFormat II koduD3090
  • CSI UniFormat II başlığıOther HVAC Systems & Equipment

Bölge bulunurluk durumu

Kuzey Amerika
Birleşik Devletler
Kanada
Common.Footer.ValueProp.Image.AltText

Revit için Tasarım Uygulaması

Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

  • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
  • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
  • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin