Publiko produktet
MVB Vertical Hydronic Boilers, 2503 - 4003
Raypak

MVB Vertical Hydronic Boilers, 2503 - 4003

Time-honored technologies unite with cutting-edge advancements in Raypak’s MVB modulating vertical boiler. Small space is no longer a problem, and our compact design fits through a 32” door opening to make it the perfect choice for those hard-to-reach retrofit projects.

Features:

  • 85% Thermal Efficiency at Full Rate; Up to 88.4% at Part Load.
  • Positive vent pressure, Condensing Appliance.  Cat IV Vent Required.
  • Bronze Headers with Copper Finned-Tube Heat Exchanger standard. Cupro-Nickel tubes available. ASME Section IV constructed and stamped, National Board registered.
  • CSA Low-Lead certified, less than 0.25% Lead.
  • Certified to ANSI Z21.13.
  • Minimum Inlet Water Temperature: 120°F.
  • Maximum Operable Outlet Water Temperature: 235°F.
  • Electronic Modulation, 7:1 Turndown.
  • VERSA IC® Control Package with Built-In Outdoor Reset Function and 7" touchscreen Display, Including System Sensor, Indirect Sensor & Indirect Supply Sensor.
  • Status Display Lights.
  • Cascade control of up to 8 units, no external sequencer required.
  • Cascade in parallel or sequential modulation modes.
  • Diagnostics Center with History, English, no codes.
  • Modbus RTU BMS port (RS485).
  • 0-10 VDC BMS Interface (Setpoint or Direct Drive).
  • All models indoor/outdoor construction.
  • Low NOx; consult local regulations.
  • Engineered with precisely matched system components.
  • Smallest installed footprint (11.7 square feet) design fits tight spaces and easily replaces larger boilers.
  • 100% Factory Fire Tested.
  • Complete cabinet protects all controls and wiring. Tough, rust-resistant powder-coat finish.
  • Suitable for altitudes up to 10,000 ft. (derate above 2,000 ft.).
  • No boiler condensate drain required (proprietary design)
  • Available for natural gas or propane.
  • Integral Combustion Air Filter (MERV8).
  • Multiple Pump Outputs – Boiler Pump, System Pump, Indirect Pump.
  • Whisper-Quiet Operation.
  • Proudly Assembled in the USA.

Options:

  • Outdoor air Sensor (B-32)
  • BACNet IP, BACnet MS/TP, Modbus TCP, N2 Metasys (B-85)
  • Lonworks (B-86)
  • Alarm with 4” Bell (E-5)
  • Low Water Cutoff (F-10)
  • Cold Water Protection
  • Condensate Neutralizer (Z-12)
Özellikler
    • 85.1% thermal efficiency at full rate 
    • 100% factory fire-tested 
    • VERSA IC® modulating controller with 7" color touchscreen display 
    • Raymote™ IoT connectivity standard 
    • Full electronic modulation, constant ratio up to 7:1 turndown 
    • Full safety diagnostics with history 
    • Status display lights 
    • Cascade up to 8 heaters - no external sequencer required 
    • Modbus RTU BMS port 
    • CSA Low-lead certified ≤ .25% lead 
    • Maximum outlet water temperature: 235ºF (112ºC) 
    • Minimum inlet water temperature: 120ºF (48ºC) 
    • Limited 20-year thermal shock warranty 
    • Limited 5-year copper/10-year cupronickel heat exchanger warranty 
    • BAAQMD Rule 9-7 certified, Low NOx < 30 ppm 
    • Proudly assembled in the USA
Teknik özellikler
  • Benzersiz ref.MVB-Vertical-Hydronic-Boilers-2503-4003
  • Ürün ailesiBoilers & Water Heaters
  • Ürün grubuHydronic Boilers
  • TipObje (Tekil Nesne)
  • Yayınlanma tarihi2020-10-01
  • Baskı numarası1
İlgili
  • Tasarım yeriBirleşik Devletler
  • Üretim yeriBirleşik Devletler
Sınıflandırma
  • BIMobject kategorisiHVAC - Su ısıtıcıları
  • IFC sınıflandırmasıSu ısıtıcı
  • ETIM KoduEG015210
  • ETIM AdıBoilers and heaters
  • UNSPSC adıBoilers
  • UNSPSC kodu401020
  • Uniclass 2015 koduPr_60_60_08
  • Uniclass 2015 açıklamasıBoilers
  • CSI MasterFormat 2014 kodu23 52 00
  • CSI MasterFormat 2014 başlığıHeating Boilers
  • OmniClass numarası23-33 11 00
  • OmniClass başlığıCommercial Boilers
  • CSI UniFormat II koduD3090
  • CSI UniFormat II başlığıOther HVAC Systems & Equipment

Bölge bulunurluk durumu

Kuzey Amerika
Birleşik Devletler
Kanada
Common.Footer.ValueProp.Image.AltText

Revit için Tasarım Uygulaması

Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

  • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
  • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
  • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin