제품 게시
Low Head Loss Stainless Steel Reduced Pressure Zone Assemblies with Integral Butterfly or OSY Shutoff - Deringer 40X/40GX
Low Head Loss Stainless Steel Reduced Pressure Zone Assemblies with Integral Butterfly or OSY Shutoff - Deringer 40X/40GX

    Low Head Loss Stainless Steel Reduced Pressure Zone Assemblies with Integral Butterfly or OSY Shutoff - Deringer 40X/40GX

    Ames Deringer™ 40X and 40GX Reduced Pressure Zone Assemblies  are designed to prevent hazardous contaminants and non-health hazard pollutants from entering the potable water supply system caused by backpressure and/or backsiphonage conditions. Deringer 40X features integral Eccentric-seal™ butterfly shutoff valves for a short lay length, XL body and checks for lower head loss, and True-Seal™ and Dual-action™ checks for high performance at low- and high-flow rates. Deringer 40GX has all of the same great features, but with OS&Y shutoff valves.

    Either may be installed under continuous pressure service to protect against both backpressure and backsiphonage. Maximum working pressure: 175psi (12 bar).


    사양
    • Features

      • Integral shutoffs for shorter lay length and light weight construction (Deringer 40X only)
      • Tamper-resistant test cocks
      • XL body and checks for low head loss
      • Dual-action check module for low- and high-flow performance
      • Bow-seal™ full access cover for lower weight and easy access to valve internals
    기술 사양
    • 특징 참조deringer-40x-40gx-backflow-preventer
    • 제품군Plumbing & Flow Control Solutions
    • 제품분류Backflow Prevention
    • 유형개체 (단일 개체)
    • 게시일2020-03-10
    • 에디션 넘버1
    관련성
    • 주 재료Bronze
    • 설계국가미국
    • 제조국가미국
    분류
    • BIMobject 카테고리배관 - 밸브
    • IFC 분류밸브
    • UNSPSC 이름Valves
    • UNSPSC 코드401416
    • Uniclass 2015 코드Pr_65_54_40_13
    • Uniclass 2015 설명Check valves
    • CSI 마스터 형식 2014 코드40 05 65
    • CSI 마스터 형식 2014 제목Valves for Pump Control and Check Service
    • OmniClass 번호23-27 31 19
    • OmniClass 제목Check Valves
    • CSI 단일 형식 II 코드C1030
    • CSI 단일 형식 II 제목Fittings

    지역 가용성

    북미
    미국
    캐나다
    Common.Footer.ValueProp.Image.AltText

    Revit용 Design App

    한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.

    새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.

    • 체크 표시Revit 바로 옆에서 BIM 개체로 직접 작업
    • 체크 표시 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
    • 체크 표시 Revit에서 바로 내재 탄소 LCA(A1-A3) 획득