제품 게시
Air Gaps For Reduced Pressure Zone Assemblies - Air Gaps

Air Gaps For Reduced Pressure Zone Assemblies - Air Gaps

Air Gaps for Reduced Pressure Zone Assemblies provide an unobstructed, physical separation between the discharge end of a potable water supply line and an open receiving vessel. The installation of an air gap and drain line are recommended on reduced pressure zone assemblies. Air Gaps can be installed vertically or horizontally (vent elbow required for vertical installation.)

사양
  • Features

    • Detects potential underground water leaks or unauthorized water usage
    • Seats, discs, and auxiliary bypass line/components are all field replaceable
    • Gear-operated ball valve shutoffs with pre-wired tamper switches
    • Both check modules can be easily accessed via a single top entry cover, and servicing requires no special tools
기술 사양
  • 특징 참조air-gaps
  • 제품군Plumbing & Flow Control Solutions
  • 제품분류Backflow Prevention
  • 유형개체 (단일 개체)
  • 게시일2019-11-18
  • 에디션 넘버2
관련성
  • 주 재료Bronze
  • 설계국가미국
  • 제조국가미국
분류
  • BIMobject 카테고리배관 - 밸브
  • IFC 분류밸브
  • UNSPSC 이름Valves
  • UNSPSC 코드401416
  • Uniclass 2015 코드Pr_65_54_40_13
  • Uniclass 2015 설명Check valves
  • CSI 마스터 형식 2014 코드40 05 65
  • CSI 마스터 형식 2014 제목Valves for Pump Control and Check Service
  • OmniClass 번호23-27 31 19
  • OmniClass 제목Check Valves
  • CSI 단일 형식 II 코드C1030
  • CSI 단일 형식 II 제목Fittings

지역 가용성

북미
미국
캐나다
Common.Footer.ValueProp.Image.AltText

Revit용 Design App

한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.

새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.

  • 체크 표시Revit 바로 옆에서 BIM 개체로 직접 작업
  • 체크 표시 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
  • 체크 표시 Revit에서 바로 내재 탄소 LCA(A1-A3) 획득