Pubblica i tuoi prodotti
Hi Delta Hot Water Heaters, 992C-2342C
Raypak

Hi Delta Hot Water Heaters, 992C-2342C

Raypak's family of Hi Delta® water heaters feature up to 85% efficiency, 105ºF minimum inlet water temperature, and a status display and on-board diagnostic center with history in English, not in codes.

Features

  • Up to 85% efficiency
  • Multiple vertical venting and sidewall venting options. No extractor required for sidewall applications up to 70ft on room air.
  • All models indoor/outdoor certified
  • Patented burner “security blanket” enhances staged combustion, minimizes installation/start-up issues, and protects burners from metal fatigue.
  • 105ºF minimum inlet water temperature
  • Brass headers with copper finned tube heat exchanger. Glass-lined, cast-iron headers and cupro-nickel tubes available as options. AB 1953 compliant.
  • VERSA IC® control package with LCD display
  • Status display lights
  • Cascade control of up to 8 units, no external sequencer required.
  • Diagnostics center with history in English , not in codes
  • Modbus RTU BMS port (RS485)
  • 0-10 VDC BMS Interface (set point or direct drive)
  • Ducted combustion air capable. TruSeal® CSA-Certified direct-vent available.
  • Models 992C-2002C certified to SCAQMD Rule 1146.2. Meets all Low NOx regulations.
  • All models except 2002C available for natural gas and propane. Model 2002C available for natural gas only.
Voce di capitolato
    • 100% Factory fire-tested 
    • Up to 85% thermal efficiency 
    • Versa IC® controller with LCD display 
    • Maximum Setpoint: 160°F (71.1°C) 
    • Maximum outlet temperature: 200°F (93.3°C) 
    • Minimum non-condensing inlet temperature: 105°F (40.6°C) 
    • Limited 10-year cupronnickel heat exchanger warranty 
    • Limited 5-Year copper heat exchanger warranty 
    • Full safety diagnostics with fault history 
    • PolyTuf powder-coated cabinet 
    • No combustible floor shield required 
    • Fan-assisted 
    • Patented burner security blanket 
    • SCAQMD Rule 1146.2 certified, Low NOx < 20 ppm 
    • Cascade up to 8 heaters – no external sequencer required 
    • Proudly assembled in the USA
Specifiche tecniche
  • Rif. UnicoHi-Delta-Water-Heaters-992C-2342C
  • Famiglia di prodottoBoilers & Water Heaters
  • Gruppo di famigliaDomestic Hot Water Heaters
  • TipoOggetto (oggetto singolo)
  • Data di pubblicazione2020-10-01
  • Numero di versione1
Relativo a
  • Progettato inStati Uniti
  • Prodotto inStati Uniti
Classificazioni
  • Categoria BIMobjectRiscaldamento, ventilazione e condizionamento - Scaldabagno
  • Clasificazione IFCScambiatore di calore
  • Codice ETIMEC010868
  • Nome ETIMGas-fired water heater
  • Nome UNSPSCDomestic water heaters
  • Codice UNSPSC40101825
  • Codice Uniclass 2015Pr_60_60_96
  • Descrizione Uniclass 2015Water heaters
  • Codice CSI MasterFormat 201422 34 00
  • Titolo CSI MasterFormat 2014Fuel-Fired Domestic Water Heaters
  • Numero OmniClass23-31 29 00
  • Titolo OmniClassHot Water Heaters
  • Codice CSI UniFormat IID3090
  • Titolo CSI UniFormat IIOther HVAC Systems & Equipment

Disponibilità Regionale

Nord America
Canada
Stati Uniti
Common.Footer.ValueProp.Image.AltText

App di progettazione per Revit

Carica le famiglie direttamente nel tuo modello Revit con un solo clic

Ottieni un posto per accedere più facilmente a nuovi oggetti, archivia le tue famiglie Revit e collabora con il tuo team.

  • Segno di spuntaLavora direttamente con gli oggetti BIM accanto a Revit
  • Segno di spunta 2 GB di spazio di archiviazione cloud: archivia i tuoi contenuti Revit
  • Segno di spunta Ottieni l'LCA (A1-A3) del carbonio incorporato direttamente da Revit