Pubblica i tuoi prodotti
XTherm Condensing Pool Heaters 1005A-2005A
Raypak

XTherm Condensing Pool Heaters 1005A-2005A

Raypak’s XTherm product packs everything you need into one cabinet – a vertical heat exchanger, ultra-high efficiency (up to 97%), a heater pumping package, easy-to-understand diagnostics, low emissions, even a built-in multi-unit controller. The result is a pool heater that is practically plug-and-play.

Features:

  • 97% Thermal Efficiency at Full Rate.
  • Positive vent pressure, Condensing Appliance.  Cat IV Vent Required.
  • Bronze Headers with Cupro-Nickel Finned-Tube Primary Heat Exchanger. 316L Stainless Steel Condensing Heat Exchanger. ASME Section IV constructed and stamped, National Board registered.
  • CSA Low-Lead certified, less than 0.25% Lead.
  • Certified to ANSI Z21.56.
  • Minimum Continuous Inlet Water Temperature: 50°F.
  • Maximum Setpoint: 106°F.
  • On/Off Operation with Soft Start.
  • VERSA IC® Control Package with LCD Display.
  • Status Display Lights.
  • Cascade control of up to 8 units, no external sequencer required.
  • Diagnostics Center with History, English, no codes.
  • Modbus RTU BMS port (RS485).
  • 0-10 VDC BMS Interface (Setpoint or Direct Drive).
  • All models indoor/outdoor construction.
  • Certified under SCAQMD Rule 1146.2.  Meets all Low NOx regulations.
  • Engineered with precisely matched system components.
  • Smallest installed footprint (under 11 square feet) design fits tight spaces and easily replaces larger boilers.
  • 100% Factory Fire Tested.
  • Complete cabinet protects all controls and wiring. Tough, rust-resistant powder-coat finish.
  • Suitable for altitudes up to 10,000 ft. (derate above 5,000 ft.).
  • Available for natural gas or propane.
  • Integral Combustion Air Filter (MERV8).
  • Multiple Pump Outputs – Heater Pump, System Pump.
  • Whisper-Quiet Operation.
  • Proudly Assembled in the USA.

Options:

  • BACNet IP, BACnet MS/TP, Modbus TCP, N2 Metasys (B-85)
  • Lonworks (B-86)
  • PVC Vent – Factory-Installed ONLY (D-32)
  • Centrotherm® Polypropylene Vent Adapter (D-33)
  • Alarm with 4” Bell (E-5)
  • Low Water Cutoff (F-10)
  • Condensate Neutralizer (Z-12)
Voce di capitolato
    • 97% thermal efficiency at full rate 
    • 100% factory fire-tested 
    • VERSA IC® integrated controller with 7" color touchscreen display 
    • Raymote™ remote connectivity provided standard 
    • Full safety diagnostics with history 
    • Status display lights 
    • Cascade up to 8 heaters – no external sequencer required 
    • Maximum outlet water temperature setpoint: 104°F (40°C) 
    • Minimum acceptable inlet water temperature: 50°F (10°C) 
    • Limited 25-year thermal shock warranty 
    • Limited 5-year primary heat exchanger warranty 
    • Limited 10-year secondary heat exchanger warranty 
    • Maximum Pool Setpoint 106°F (41°C) (104°F [40°C] default)
    • On/Off operation 
    • SCAQMD Rule 1146.2 certified, Low NOx < 20 ppm 
    • Primary/secondary piping mandatory for proper operation 
    • Proudly assembled in the USA
Specifiche tecniche
  • Rif. UnicoXTherm-Condensing-Pool-Heaters-1005A-2005A
  • Famiglia di prodottoPool & Spa Products
  • Gruppo di famigliaCommercial Pool Heaters
  • TipoOggetto (oggetto singolo)
  • Data di pubblicazione2020-10-01
  • Numero di versione1
Relativo a
  • Progettato inStati Uniti
  • Prodotto inStati Uniti
Classificazioni
  • Categoria BIMobjectRiscaldamento, ventilazione e condizionamento - Scaldabagno
  • Clasificazione IFCScambiatore di calore
  • Nome UNSPSCDomestic water heaters
  • Codice UNSPSC40101825
  • Codice Uniclass 2015Pr_60_60_96
  • Descrizione Uniclass 2015Water heaters
  • Codice CSI MasterFormat 201423 00 00
  • Titolo CSI MasterFormat 2014Heating, Ventilating, and Air Conditioning (HVAC)
  • Numero OmniClass23-33 00 00
  • Titolo OmniClassHVAC Specific Products and Equipment
  • Codice CSI UniFormat IID3090
  • Titolo CSI UniFormat IIOther HVAC Systems & Equipment

Disponibilità Regionale

Nord America
Canada
Stati Uniti
Common.Footer.ValueProp.Image.AltText

App di progettazione per Revit

Carica le famiglie direttamente nel tuo modello Revit con un solo clic

Ottieni un posto per accedere più facilmente a nuovi oggetti, archivia le tue famiglie Revit e collabora con il tuo team.

  • Segno di spuntaLavora direttamente con gli oggetti BIM accanto a Revit
  • Segno di spunta 2 GB di spazio di archiviazione cloud: archivia i tuoi contenuti Revit
  • Segno di spunta Ottieni l'LCA (A1-A3) del carbonio incorporato direttamente da Revit