Armatherm™ FRR Steel Balcony Canopy (US)

Armatherm™ FRR Steel Balcony Canopy (US)

Balcony Thermal Bridging Solution - FRR

Reducing heat flow within a building’s thermal envelope reduces energy consumption as well as potential condensation issues. Thermal bridging through steel and concrete framing can have a significant impact on a building’s energy performance. Armatherm™ FRR thermal break material provides low thermal conductivity and high compressive strength. Armatherm™ FRR is made of a reinforced, thermoset resin which enables FRR to boast limited combustibility and reduce the amount of creep under load making it the ideal material for use in structural thermal break connections

Applications of Armatherm™ FRR

Balconies
Canopies
Masonry Shelf Angles
Beam Connections
Lintels
Curtain Wall Mullions
Rain Screens
Column base

ISOLATION WASHERS AND BUSHINGS
A thermal break should also be provided at the front side of the bolt head between two steel washers and face of the exterior steel. This prevents a thermal bridge through the bolt which would otherwise provide a path for heat flow through the thermal break assembly. Armatherm™ Isolation washers and bushings are recommended to eliminate this path and any potential for condensation within the building envelope. Contact us for assistance with your structural design or thermal calculations.

CUSTOMER ISOLATION BUSHINGS AND WASHERS ALSO AVAILABLE UPON REQUEST.

Tekniset tiedot

Balcony Thermal Bridging Solution Break

Specification of Armatherm FRR
Masimum Loading Pressure	43000 psi
Compressive Modulus	835000 psi
Shear Strength	16000 psi
Standard Thickness	1/2", 3/4", 1", 2"
Thermal Conductivity	1.056 BTU∙in/h∙ft²∙°F
Minimum Operating Temp	-60°F
Maximum Operating Temp	220°F

thermal break, balcony, parapet, column base, shelf angle, curtain wall, insulation pad, structural thermal break, Armatherm, thermal bridging, psi-value, U-value, energy code, envelope detailing

Tekniset tiedot

Yksilöity viitearmatherm-frr-steel-Balcony-Canopy-Thermal-Bridging-Solution
TuoteperheArmatherm™ FRR
TuoteryhmäStructural Thermal Break
TyyppiRakennusmateriaalit
Julkaisupäivä2024-11-25
Painoksen numero1

Linkit

Tuotteen urlhttps://www.armatherm.com/thermal-break-materials/armatherm-frr/
Esittelyvideohttps://www.armatherm.com/resources/
Tekninen kuvaushttps://www.armatherm.com/thermal-bridging-applications/balcony-canopy-thermal-bridging-solution/

Liittyviä

Ensisijainen materiaaliComposite
Suunniteltu:Yhdysvallat
Valmistettu:Yhdysvallat

Luokitus

BIMobject-luokkaRakennusmateriaalit - Eristys
IFC-luokitusRakenteellinen liitäntä
ETIM-koodiEC000406
ETIM-nimiThermal insulation
UNSPSC-nimiThermal insulation
UNSPSC-koodi301415
Uniclass 2015 -koodiPr_35_90_15_89
Uniclass 2015 -kuvausThermal break connection plates
CSI MasterFormat 2014 -koodi07 21 00
CSI MasterFormat 2014 -nimikeThermal Insulation
OmniClass-numero23-13 25 19
OmniClass-nimikeThermal Insulation

Alueellinen saatavuus

Pohjois-Amerikka	Etelä-Amerikka
Anguilla	Argentiina
Antigua ja Barbuda	Bolivia
Aruba	Brasilia
Bahamasaaret	Chile
Barbados	Ecuador
Belize	Falklandinsaaret (Malvinassaaret)
Bermuda	Guyana
Brittiläiset Neitsytsaaret	Kolumbia
Caribbean Netherlands	Paraguay
Caymansaaret	Peru
Costa Rica	Ranskan Guayana
Curaçao	Surinam
Dominica	Uruguay
Dominikaaninen tasavalta	Venezuela
El Salvador
Grenada
Grönlanti
Guadeloupe
Guatemala
Haiti
Honduras
Jamaika
Kanada
Kuuba
Martinique
Meksiko
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts ja Nevis
Saint Lucia
Saint Vincent ja Grenadiinit
Saint-Barthélemy
Saint-Martin
Saint-Pierre ja Miquelon
Sint Maarten
Trinidad ja Tobago
Turks- ja Caicossaaret
Yhdysvallat
Yhdysvaltain Neitsytsaaret