Julkaise tuotteesi
ARMATHERM™ 500 SERIES - Column Base (US)

ARMATHERM™ 500 SERIES - Column Base (US)

Armatherm™ 500 - Column Base

Reducing heat flow within a building’s thermal envelope reduces energy consumption as well as potential condensation issues. Armatherm™ 500 thermal break material (TIM) significantly reduces energy lost from thermal bridging in building envelope connections.

Armatherm™ 500 structural thermal break material is a high density, thermoset polyurethane manufactured in several densities.

Armatherm™ 500 thermal break material can support high loads and has a selection of four grades of material with different compressive strength capabilities.

The Armatherm™ 500 thermal insulation blocks have very limited creep under load, plus they do not absorb water because of their closed cell structure. Therefore, energy lost via thermal bridging is reduced within building envelope connections. Heat flow, energy consumption and potentially dangerous condensation issues are all minimised as a result.

The standard thicknesses Armatherm™ 500 is available in are 5mm, 10mm, 12mm, 15mm, 20mm, 25mm, 50mm. Furthermore, the high density, polyurethane material sheets can be layered or customised with ease to achieve the desired U value and thickness specifications. It is extremely dynamic and can be used across the building, wherever features a penetration or transition exit through a building envelope. It can be cut and drilled on site easily, where a thermal bridge occurs, if necessary. Armatherm™500-320 and Armatherm ™500-490 are the most common specifications.

Not only is Armatherm™500 the ideal solution to prevent thermal bridging in buildings to reduce heat loss, it is also suitable for cold storage facilities to prevent the subgrade from freezing. This is necessary for frozen food storage, Armatherm™500 sits directly under the column base to prevent the transfer of cold temperatures into the ground.

Column Base Thermal Bridging Solution

Internal steel columns traditionally extend through the building envelope floor slab and insulation at their base. In low temperature buildings such as freezer rooms and cold storage facilities, this creates a thermal bridge and point transmittance (heat loss) at the steel column base. This is also the case for exterior columns which support floors or roof overhangs. The column to roof connection interrupts the continuous insulation creating heat loss due to thermal bridging.

Tekniset tiedot
  • Specifications of Armatherm™ 500 Series 500-080 500-150 500-200 500-280
    Compressive Strength (psi) 210 560 1100 2150
    Compressive Modulus (psi) 6155 18130 29000 49300
    Sheer strength (psi) 145 167 257 310
    Thermal Conductivity (BTU in/hr ft 2F) 0.26 0.32 0.39 0.53
    R Value per Inch 3.85 3.1 2.6 1.9
    Operating Temperature (°F) -300 -300 -300 -300



    thermal break, balcony, parapet, column base, shelf angle, curtain wall, insulation pad, structural thermal break, Armatherm, thermal bridging, psi-value, U-value, energy code, envelope detailing

Tekniset tiedot
  • Yksilöity viitearmatherm-500-series-column-base
  • TuoteperheArmatherm™ 500
  • TuoteryhmäStructural Thermal Break
  • TyyppiRakennusmateriaalit
  • Julkaisupäivä2025-07-10
  • Painoksen numero1
Liittyviä
  • Ensisijainen materiaaliPolyuretaani
  • Suunniteltu:Yhdysvallat
  • Valmistettu:Yhdysvallat
Luokitus
  • BIMobject-luokkaRakennusmateriaalit - Eristys
  • IFC-luokitusRakenteellinen liitäntä
  • ETIM-koodiEC000406
  • ETIM-nimiThermal insulation
  • Uniclass 2015 -koodiPr_35_90_15_89
  • Uniclass 2015 -kuvausThermal break connection plates
  • CSI MasterFormat 2014 -koodi07 21 00
  • CSI MasterFormat 2014 -nimikeThermal Insulation
  • OmniClass-numero23-13 25 19
  • OmniClass-nimikeThermal Insulation 

Alueellinen saatavuus

Pohjois-Amerikka Etelä-Amerikka
Anguilla
Argentiina
Antigua ja Barbuda
Bolivia
Aruba
Brasilia
Bahamasaaret
Chile
Barbados
Ecuador
Belize
Falklandinsaaret (Malvinassaaret)
Bermuda
Guyana
Brittiläiset Neitsytsaaret
Kolumbia
Caribbean Netherlands
Paraguay
Caymansaaret
Peru
Costa Rica
Ranskan Guayana
Curaçao
Surinam
Dominica
Uruguay
Dominikaaninen tasavalta
Venezuela
El Salvador
Grenada
Grönlanti
Guadeloupe
Guatemala
Haiti
Honduras
Jamaika
Kanada
Kuuba
Martinique
Meksiko
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts ja Nevis
Saint Lucia
Saint Vincent ja Grenadiinit
Saint-Barthélemy
Saint-Martin
Saint-Pierre ja Miquelon
Sint Maarten
Trinidad ja Tobago
Turks- ja Caicossaaret
Yhdysvallat
Yhdysvaltain Neitsytsaaret