发布您的产品
OS Loop Coordinator
OS Loop Coordinator
OS Loop Coordinator
OS Loop Coordinator
OS Loop Coordinator

    OS Loop Coordinator

    The OSLoop Coordinator is a modular smoke control system built around a central Coordinator Module and up to 16 remotely mounted Manual Control Points (MCPs), with the ability to scale further by linking multiple coordinators. The coordinator manages power and data throughout the network, continuously monitoring mains and battery supplies while intelligently allocating power for AOV activation based on system demand.

    Each MCP includes actuator switching circuitry with full fault monitoring of actuators, detectors, and associated cabling, supporting up to three smoke detectors per unit. MCPs can operate independently or in grouped configurations, enabling flexible system design.

    The OSLoop system delivers up to 40% cable savings, uses up to 50% fewer devices than conventional systems, reduces installation time, and is fully compliant with EN12101-10:2005 + C1:2007, as well as EMC and LVD standards.

    This BIM object provides all necessary technical data, connection details, and model attributes to support accurate placement, coordination, and integration within smoke ventilation and life-safety system designs.

    规格
    • Electrical Supply

      Input Voltage; 230V ac, 50/60Hz (± 10%) supplied from a 5A unswitched spur

      Power Consumption: 500 VA

      Output Characteristics

      Typical Output Voltage (Mains Power / Max Load 7.0A)

      Nominal: 24.0 V

      Maximum: 28.4 V at 253 V ac

      Minimum: 18.2 V at 207 V ac

      Typical Output Voltage (No Mains Power):

      Nominal: 24.0 V

      Maximum: 28.8 V

      Minimum: 18.5 V

      Maximum Current Output (Mains and Battery Combined)

      7.0 A for up to 180 seconds

      Peak current may exceed 7.0A for a short duration*

      Auxiliary Outputs (VC, VO, VE): Nominal 24.0 V. 100 mA / 40 mA

      Battery Backup

      Battery Type: 2 x 12V dc, 12.0 Ah sealed lead-acid batteries (sold separately)

      Battery Standby Time: 72 hours*

      Expected battery Life: 3+ years at 25°C

      Real-Time Clock Battery Life: 10 years

      Environmental Conditions

      Humidity: 10% to 90% non-condensing

      Storage Temperature: -20°C to +50°C

      Operating Temperature: -5°C to 40°C

      Physical Characteristics

      Cable Entries:

      Up to 6 x 20mm end mounted cable glands

      1 x rear entry slot for concealed installation

      Dimensions (W x H x D): 310 x 380 x 130 mm

      Mass Approx. 4.1 kg

      Notes:

      * On mains failure, the average auxiliary current must be less than 40 mA to achieve 72 hours of battery backup.

      Peak current values may exceed rated limited briefly during transient demand.

    技术规格
    • 唯一参考SECBIM0005
    • 产品系列Control Systems
    • 产品组Controller
    • 类型对象(单个对象)
    • 发布日期2016-05-26
    • 版本号1
    • 高度 (mm)380
    • 宽度 (mm)310
    • 深度 (mm)130
    相关
    • 主材料
    • 设计国家/地区英国
    • 制造国家/地区英国
    • 净重 (Kg)4.1
    分类
    • BIMobject 类别电气 - Controls
    • IFC 分类控制器
    • Uniclass 2015 代码Pr_75_50_18
    • Uniclass 2015 说明Controllers and control panels

    发售地区

    欧洲 亚洲 北美 非洲 南美洲 大洋洲
    丹麦
    不丹
    伯利兹
    中非共和国
    乌拉圭
    东帝汶
    乌克兰
    中国
    加拿大
    乌干达
    厄瓜多尔
    关岛
    俄罗斯
    乌兹别克斯坦
    危地马拉
    佛得角
    哥伦比亚
    北马里亚纳群岛
    保加利亚
    也门
    哥斯达黎加
    冈比亚
    圭亚那
    图瓦卢
    克罗地亚
    亚美尼亚
    圣卢西亚
    几内亚
    委内瑞拉
    基里巴斯
    冰岛
    以色列
    圣基茨和尼维斯
    几内亚比索
    巴拉圭
    密克罗尼西亚联邦
    列支敦士登
    伊拉克
    圣巴泰勒米
    刚果
    巴西
    巴布亚新几内亚
    匈牙利
    伊朗
    圣皮埃尔和密克隆群岛
    刚果民主共和国
    智利
    帛琉
    北马其顿
    卡塔尔
    多米尼克
    利比亚
    法属圭亚那
    库克群岛
    卢森堡
    印度
    多米尼加共和国
    利比里亚
    玻利维亚
    所罗门群岛
    圣马力诺
    印度尼西亚
    安圭拉
    加纳
    福克兰群岛(即马尔维纳斯群岛)
    托克劳
    塞尔维亚
    叙利亚
    安提瓜和巴布达
    加蓬
    秘鲁
    斐济
    塞浦路斯
    台湾
    尼加拉瓜
    南苏丹
    苏里南
    新喀里多尼亚
    奥兰
    吉尔吉斯斯坦
    巴哈马
    南非
    阿根廷
    新西兰
    奥地利
    哈萨克斯坦
    巴巴多斯
    博茨瓦纳
    汤加
    安道尔
    土库曼斯坦
    巴拿马
    卢旺达
    法属波利尼西亚
    希腊
    土耳其
    库拉索
    厄立特里亚
    澳大利亚
    德国
    圣诞岛
    开曼群岛
    吉布提
    瑙鲁
    意大利
    塔吉克斯坦
    格林纳达
    喀麦隆
    瓦利斯和富圖納群島
    拉脱维亚
    大韓
    格陵兰岛
    圣多美和普林西比
    瓦努阿图
    挪威
    孟加拉国
    法属圣马丁
    圣赫勒拿岛
    皮特凯恩群岛
    捷克共和国
    尼泊尔
    波多黎各
    坦桑尼亚
    纽埃
    摩尔多瓦
    巴勒斯坦
    洪都拉斯
    埃及
    美国本土外小岛屿
    摩纳哥
    巴基斯坦
    海地
    埃塞俄比亚
    美属萨摩亚
    斯洛伐克
    巴林
    牙买加
    塞内加尔
    萨摩亚
    斯洛文尼亚
    文莱达鲁萨兰国
    特克斯和凯科斯群岛
    塞拉利昂
    诺福克岛
    斯瓦尔巴特群岛
    斯里兰卡
    特立尼达和多巴哥
    塞舌尔
    马绍尔群岛
    格恩西岛
    新加坡
    瓜德罗普
    多哥
    梵蒂冈
    日本
    百慕大
    安哥拉
    比利时
    朝鲜
    美国
    尼日利亚
    法国
    柬埔寨
    美属维尔京群岛
    尼日尔
    法罗群岛
    格鲁吉亚
    聖文森與格瑞那丁
    布基纳法索
    波兰
    沙特阿拉伯
    英属维尔京群岛
    布隆迪
    波斯尼亚 黑塞哥维那
    泰国
    荷属圣马丁
    摩洛哥
    泽西岛
    澳门
    荷蘭加勒比區
    斯威士兰
    爱尔兰
    科威特
    萨尔瓦多
    查德
    爱沙尼亚
    科科斯(基林)群岛
    蒙塞拉特岛
    毛里塔尼亚
    瑞典
    约旦
    阿鲁巴
    毛里求斯
    瑞士
    缅甸
    马提尼克
    津巴布韦
    白俄罗斯
    老挝
    墨西哥
    留尼汪
    直布罗陀
    英属印度洋领地
    科摩罗
    立陶宛
    菲律宾
    科特迪瓦
    罗马尼亚
    蒙古
    突尼斯
    芬兰
    越南
    索马里
    英国
    阿塞拜疆
    纳米比亚
    荷兰
    阿富汗
    肯尼亚
    葡萄牙
    阿拉伯联合酋长国
    苏丹
    西班牙
    阿曼
    莫桑比克
    阿尔巴尼亚
    香港
    莱索托
    马恩岛
    马尔代夫
    西撒哈拉
    马耳他
    马来西亚
    贝宁
    黑山
    黎巴嫩
    赞比亚
    赤道几内亚
    阿尔及利亚
    马拉维
    马约特
    马达加斯加岛
    马里
    Common.Footer.ValueProp.Image.AltText

    Revit 版 Design App

    只需单击一下,即可将族直接加载到您的 Revit 模型中

    获取一个更轻松地访问新对象、存储 Revit 族以及与团队协作的地方。

    • 勾选标记直接与 Revit 旁边的 BIM 对象一起工作
    • 勾选标记 2GB 云存储 - 存储您的 Revit 内容
    • 勾选标记 直接从 Revit 获取内含碳 LCA (A1-A3)