LED system
Luminaire luminous flux 13500 lm, connected load 95,00 W, Power Faktor λ > 0,9, luminous efficiency of luminaire 142 lm/W. Light colour neutral white, correlated colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 80. Mean rated service life L80(tq 25 °C) = 50,000 h. The light source is replaceable according to the ecodesign requirements (VO (EU) 2019/2020).
Luminaire body
Luminaire body of aluminium. Consisting of luminaire head, stand profile and base. Surface powder-coated with smooth finish, colour white (RAL 9016). Luminaire head and post in angular version. The base is u-shaped. Dimensions of luminaire head: 835 mm x 300 mm, luminaire height: 1960 mm. Safety class (EN 61140): I, protection rating (DIN EN 60529): IP20, impact resistance level in accordance with IEC 62262: IK02, testing temperature of wire glow test in accordance with IEC 60695-2-11: 650 °C. Weight: 14,7 kg.
Electrical version
With electronic control gear unit, dimmable (integrated). Luminaire is switchable and dimmable by means of touch functionality via DALI control terminals (Touch DIM). The control gear unit is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). Operation according to touch dim principle is achieved via a touch sensor integrated into the luminaire post flush with the post surface. Direct and indirect components can be separately dimmed. The luminaire complies with the fundamental requirements of applicable EU regulations and product safety legislation and bears the CE symbol.
Light management
With integrated passive infrared presence detector and daylight sensor. An active luminaire will reduce the light output by 70% if no movement is detected over a 30-minute period. After another 30 minutes without movement detection, the luminaire is switched off. The daylight sensor achieves a constant brightness level surrounding the luminaire when activated. The brightness reference value can be changed and saved via push-button. A DIP switch facilitates setting and combining light management operating modes (movement sensor on/off, daylight sensor on/off).
4.5 
直接与 Revit 旁边的 BIM 对象一起工作 
