发布您的产品
D4001 - Compressor, Dental Air, System
SEPS2BIM

D4001 - Compressor, Dental Air, System

4.6 星(最高 5 星)4.6(30 评价)
Dental air compressor system. Two or more equally sized compressors, with provisions for automatic, alternating and simultaneous operation shall be provided for dental air (DA). Each compressor is to be sized to operate at 65% duty cycle for maintenance of standard demand. Dental compressed air (DCA), 90 PSIG, is used for utility control in dental units, power for lifts, locks, rotary and other pneumatic dental instruments and equipment. DCA shall be oil-free air with the following air standards as maximums: Water - dry to a pressure dew point of 33 degrees F at not less than 90 PSIG; Condensed hydrocarbons - 0.1ppm by weight or 0.1 mg/L; Permanent particulates - 1.0 ppm by weight or 1.0 mg/L. Dental lab air (DLA), 30 PSIG, which is normally used for laboratory restorative and fabrication techniques may be combined with DCA. The system consists of, but not limited to, the following: compressor intake filters, compressors, after-coolers (air cooled), air receiver, pre-filter, dryer (refrigerated), after-filter. Pricing, electrical data and dimensions based upon 16-17 DTRs , each pump sized at approximately 17.5 cfm @ 100 PSIG. Other sizes and configurations are available to meet specified demands.
技术规格
  • 唯一参考D4001
  • 产品系列Compressor
  • 产品组Dental Air, System
  • 类型要求对象
  • 发布日期2016-01-01
  • 版本号1
  • 高度 (mm)1550
  • 宽度 (mm)2260
  • 深度 (mm)1470
相关
  • 设计国家/地区United States
  • 制造国家/地区United States
分类
  • BIMobject 类别医疗 - All
  • IFC 分类装饰元素

发售地区

North America
United States
Common.Footer.ValueProp.Image.AltText

Revit 版 Design App

只需单击一下,即可将族直接加载到您的 Revit 模型中

获取一个更轻松地访问新对象、存储 Revit 族以及与团队协作的地方。

  • 勾选标记直接与 Revit 旁边的 BIM 对象一起工作
  • 勾选标记 2GB 云存储 - 存储您的 Revit 内容
  • 勾选标记 直接从 Revit 获取内含碳 LCA (A1-A3)