Lumaris Power Interface

The Lumaris tape light takes scene control to the next level, offering a simple and seamless way to add tunable white accent lighting to Lutron connected home projects.

Built on the ultra-reliable Lutron Clear Connect–Type X wireless technology, the Lumaris tape light is a native component within the Lutron platform including controls, apps, programming software, and Lutron Connect cloud services.

A complete Lumaris tape light solution consists of field-cut tunable white LED tape, a wireless controller with integrated LED drivers, high-reliability punch connectors, dedicated wiring, and a plug-in power supply. Aluminum mounting channel and lens for LED tape sold separately by others.

A remote-mountable, hardwired 96 W power interface is available to power up to three wireless controllers and 48 ft (15 m) of LED tape.

规格

Power Interface
Regulatory Approvals
• cULus Listed for USA and Canada
• FCC Part 15
– Class A (277 V~)
– Class B (120 V~)
• Meets ANSI C62.41 category A surge protection
standards up to and including 4 kV
• Meets ULR 8750/CSA C22.2 No. 250.13-14,
“Light Emitting Diode (LED) Equipment For Use in
Lighting Products”
• Class 2 output; meets ULR 1310/CSA C22.2
No. 223-M91
Performance
• Operating Voltage: 120 V~/277 V~ 50/60 Hz
• Patented thermal fold back protection
• Typical standby power consumption:
0.25 W at 120 V~ and 0.4 W at 277 V~
• Open-circuit protected output
• Short-circuit and overload-protected output
• Output: 24 V- constant voltage at high-end
• Output Load Range: 2 W to 96 W at high-end
Features
• Powers up to three Lumaris controllers and 48 ft
(14.6 m) of Lumaris LED tape.
• Protected from input power miswires.
• 100% end-of-line performance tested at a
Lutron factory.
• RoHS compliant.
• Restores all settings after power failure.
• Barrier provided for Class 2 separation in the
wiring compartment.
• Redundant connections on line terminals for easy
daisy-chain wiring.
• Redundant connections on output terminals allow for
easy wiring of two LED tape home runs.
• Class 2 output designed to withstand hot swap.
• Provided with three barrel-to-terminal adapters.
Environmental
• Minimum Operating Ambient Temperature:
ta = 32 °F to 104 °F (0 °C to 40 °C)
• Relative humidity: 0% to 90% non-condensing
• Indoor use only