BIM 对象 - 免费下载！ Solution Scheme ARISTON & CALEFFI - Heat Pump for Heating-Cooling-DHW

Ariston Split Heat Pump - NIMBUS FLEX S NET: Inverter air / water split heat pump for heating, cooling (single zone) and domestic hot water. Expansion vessel of 8l always included. One high efficient circulation pump assure maximum energy savings. High efficiency (COP and EER) even in harsh climates and additional resistance of 2 or 3 stages of 2 kW to guarantee maximum comfort in every situation. An external cylinder of 180 l OR 300 l, with an excellent heat exchange surface, is used to heat up domestic hot water. Always connected (WiFi) thanks to the Gateway to control by remote the heat pump and the possibility of monitoring consumption and parameters for one temperature zone. The system interface Sensys and an external sensor for the outdoor temperature are always included too. COP very high, up to 5.25 in nominal conditions (WT 35°C, AT 7°C). Very quiet operation, with a sound power nominal outdoor unit up to 56 dB (A). Photovoltaic function implemented for an optimized coupling with the domestic PV system.
Caleffi Hydraulic Deaerator - DISCAL® serie 551: Deaerators are used to continuously remove the air contained in the hydraulic circuits of heating and cooling systems. The air discharge capacity of these devices is very high. They are capable of automatically removing all the air present in the system down to micro-bubble level. The circulation of fully deaerated water enables the systems to operate under optimal conditions, free from any noise, corrosion, localised overheating or mechanical damage. In the threaded
versions it is available for installation on horizontal pipes, and with adjustable T-fitting for installation on horizontal and vertical pipes.
Caleffi Multifunction device with dirt separator and strainer - DIRTMAGPLUS® serie 5453: The DIRTMAGPLUS® multifunction device is composed of two separate components arranged in series: a dirt separator and an interchangeable strainer. The presence of these two components allows for continuous protection of the generator and devices from any impurities that form in the hydraulic circuit both at the time of system start-up and in normal operating conditions. The impurities are first separated by the dirt separator and then collected in a large dirt collection chamber from which they can be discharged even when the system is running. Ferrous impurities are also trapped inside the body of the device thanks to the action of the two magnets inserted in a special removable outer ring. By means of mechanical selection, the mesh strainer completes the process of removing the present impurities, starting directly from the first passage. DIRTMAGPLUS® can be adjusted for horizontal, vertical and 45° installations and it is supplied complete with shut-off valves to facilitate maintenance procedures.
Caleffi by-pass valve - serie 519: The differential pressure by-pass valve is used in systems with a fixed speed circulating pump supplying several zones controlled by two way zone valves. This valve ensures that the head pressure of the pump is proportional to the number of two way valves being closed. It will by-pass the differential pressure created by the pump as the zone valves close, thus eliminating water hammer noise.

Solution Scheme ARISTON & CALEFFI - Heat Pump for Heating-Cooling-DHW

类似产品

面向制造商

关于

法律

Europe
Albania
Andorra
Belgium
Bosnia and Herzegovina
Bulgaria
Croatia
Cyprus
Czech Republic
Estonia
France
Greece
Hungary
Italy
Latvia
Lithuania
Malta
Monaco
Montenegro
North Macedonia
Poland
Portugal
Romania
San Marino
Serbia
Slovakia
Slovenia
Spain
Ukraine
Vatican City