Ravaproof Maxstoper

RAVAPROOF MaxSTOPER is a new generation waterproofing membrane based on elastomeric bitumen, with extra special polymer and SBS additives, with increased cold brittleness resistance (-25°C) and extended service life, reinforced with nonwoven polyester felt, with silica sand on the upper side and polyethylene film coated on the bottom.

Single Layer
Perfect Sealing
Extra Light Rolls
1000% extensible SBS modified bitumen
Labor and Application Time Savings
Long Material Life

FEATURES

It has an elastomeric bitumen structure with a high percentage of SBS and special polymer additives.
Ultra-flexible and has a long service life.
Upper surface coating is silica sand, lower surface coating is PE film.
It has brittleness and flexibility resistance at very low temperatures (-25 C).
Supported with high strength polyester reinforcement.

ADVANTAGES

Provides perfect solution with a single layer in roof – terrace, foundation and curtain applications – Provides perfect bonding to the application surface and has full impermeability feature.

Because of its special formula, it is very light compared to products of the same thickness; it provides convenience especially in vertical (wall, curtain) applications.

It has a minimum 20-year product performance warranty.

Due to its single layer application feature, it provides the advantage of fast application in the field and saves labor and propane costs.

Специфікація

Thickness : 5.0 mm
Unit Area Mass : 5.5 kg/m2
Length : 8 m
Width : 100 cm
Deviation from Linearity : pass
Waterproof : 10kPa
Dimensional Stability : ≤ 0,6%
Flexibility in Cold : ≤ - 25 °C
Flow Resistance : ≥ 100 °C
Tensile Properties (Length/Width) : 600/600 N/50mm
Elongation at Break (Length/Width) : 40/40 %
Resistance to Static Loads : 15 kg
Joint Sheer Resistance :1000 N/50mm (± 30%)
Water Vapor Properties : 20 000
water absorption : 1%
Binder mass (subsurface) : 2 kg/m2
SBS modified bitumen elongation : 1600%