Publiko produktet
Mesh Tray | Defem EZ
Mesh Tray | Defem EZ
Mesh Tray | Defem EZ
Mesh Tray | Defem EZ
Mesh Tray | Defem EZ
Mesh Tray | Defem EZ
Mesh Tray | Defem EZ
Mesh Tray | Defem EZ
Mesh Tray | Defem EZ
Mesh Tray | Defem EZ
    Wibe group

    Mesh Tray | Defem EZ

    Defem Mesh Tray - Flexible mesh tray system for the routing of power, data and control cables. C1 Electro-galvanized Indoor environments: Schools, shops, hotels, offices, sports halls etc. – Very low environmental corrosion. – Heated areas. – Arid atmosphere. – Insignificant quantities of pollutant. – DIN 50961/ISO 2081. C2 Pre-galvanized Partly outdoor environments: Industries, sports halls, warehouses, shops, rural outdoor areas etc. – Low environmental corrosion. – Non-heated areas with fluctuating levels of temperature and humidity. – Few instances of condensation and low levels of airborne pollution. - SS-EN 10327:2004.
    Özellikler
    • Defem is a complete cable support system for the routing of power, data and control cables. Three finishes are available; electro-zinc, hot-dip galvanized and AISI316L acid-proof stainless steel. The standard mesh trays are available in four heights (45, 55, 60 and 110 mm) and eight widths (53, 75, 120, 220, 320, 422, 522 and 622 mm). The standard length is 2.5 m. For specific applications the range also includes specially shaped C-, G- and Z-mesh trays plus three different shapes of mini mesh trays. There is a complete range of supports for wall-mounted, floor-laid, ceiling-suspended and U-bar supported installations. Accessories such as bends, raisers, reducers, etc. are formed on site from length material elements. Thanks to the uniquely shaped well-rounded wire ends, the mesh trays comply with all safety requirements for installers and cables. In addition, the wire diameter design and size allow higher safety working-load values in comparison to any other product in the market. Standards IEC 61537, UNE EN 50102, UNE EN ISO 9227, DIN 4102-12 for fire resistance E90 Materials Electro-zinc, Hot-dip galvanized, AISI316L acid-proof stainless steel
    Teknik özellikler
    • Benzersiz ref.CMS-DEFEM-EZ
    • Ürün ailesiCable Trays
    • Ürün grubuElectro Galvanized Solution
    • TipShowcase (Model)
    • Yayınlanma tarihi2022-02-14
    • Baskı numarası1
    Bağlantılar
    İlgili
    • Ana malzemeÇelik
    • İkincil malzemeÇinko
    • Tasarım yeriİsveç
    • Üretim yeriİsveç
    Sınıflandırma
    • BIMobject kategorisiElektrik - Dağıtım
    • IFC sınıflandırmasıKablo Taşıyıcı Tertibatı
    • ETIM KoduEC000853
    • ETIM AdıMesh cable tray
    • Uniclass 2015 koduPr_65_70_11_17
    • Uniclass 2015 açıklamasıCable trays
    • CSI MasterFormat 2014 kodu26 05 36
    • CSI MasterFormat 2014 başlığıCable Trays for Electrical Systems
    • OmniClass numarası23-35 33 19
    • OmniClass başlığıElectrical Cable Trays
    Common.Footer.ValueProp.Image.AltText

    Revit için Tasarım Uygulaması

    Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

    Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

    • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
    • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
    • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin