Publiko produktet
Hurricane Louver - 5-3/8" Deep - 45 Degree J-Blade with Vertical Blade Rear Section - Extruded Aluminum - EDV-545
Pottorff

Hurricane Louver - 5-3/8" Deep - 45 Degree J-Blade with Vertical Blade Rear Section - Extruded Aluminum - EDV-545

Extruded Aluminum Louver
5-3/8" Deep - J-Blade with Vertical Blade Rear Section

The EDV-545 dual-module louver is engineered and tested to withstand extreme loads, debris impact, and cyclic fatigue associated with the severe weather effects of hurricanes while maintaining water infiltration resistance at a minimum louver depth. The front (exterior) side of the louver features horizontal J-style blades for a pleasing architectural appearance. The interior side features vertical chevron blades which provide superior resistance to wind-driven rain.

Özellikler
  • Standard Construction

    Material: Mill finish 6005A-T6 extruded aluminum.

    Frames: 5-3/8" deep x 0.081" thick (137 x 2) channel.

    Blades:
    Front:
    45o x 0.08" (2) thick horizontal J-style.
    Rear: 45o x 0.05" (1.3) thick vertical chevron style.

    Screen: 1/2" x 0.063" (12.7 x 1.6) expanded and flattened aluminum.

    Mullion: Visible.

    Minimum Size: 12" x 12" (305 x 305)

    Maximum Size:
    Single Section: 60" x 96" (1524 x 2438)
    Multiple Section: Unlimited

    Shipping Weight: 8 lbs/ft2 (39 kg/m2)


    Ratings

    Free Area: 8.03 ft2 (0.75 m2)

    Performance @ Beginning Point of Water Penetration

    Free Area Velocity: 1250 fpm (6.35 m/s)

    Air Volume Delivered: 10038 cfm (4.74 m3/s)

    Pressure Loss: 0.55 in. wg. (136 Pa)

    Velocity @ 0.15 in. wg. Pressure Loss: 666 fpm (3.38 m/s)

    Design Load: 100 psf

    AMCA 540 and 550 Listed
    AMCA Certified for Water Penetration, Air Performance and Wind-Driven Rain

Teknik özellikler
  • Benzersiz ref.Hurricane-Louver-5-3-8-Deep-45-Degree-J-Blade-with-Vertical-Blade-Rear-Section-Extruded-Aluminum-EDV-545
  • Ürün ailesiHVAC
  • Ürün grubuLouvers and Penthouses
  • TipObje (Tekil Nesne)
  • Yayınlanma tarihi2024-07-16
  • Baskı numarası1
Sınıflandırma
  • BIMobject kategorisiHVAC - Kanal sistemi
  • Uniclass 2015 koduPr_30_59_48
  • Uniclass 2015 açıklamasıLouvres and components
  • CSI MasterFormat 2014 kodu08 91 00
  • CSI MasterFormat 2014 başlığıLouvers
  • OmniClass numarası23-33 29 31
  • OmniClass başlığıLouvre Dampers

Bölge bulunurluk durumu

Kuzey Amerika
Anguilla
Antigua ve Barbuda
Aruba
Bahamalar
Barbados
Belize
Bermuda
Birleşik Devletler
Caribbean Netherlands
Cayman Adaları
Curaçao
Dominik
Dominik Cumhuriyeti
El Salvador
Grenada
Grönland
Guadeloupe
Guatemala
Haiti
Honduras
İngiliz Virjin Adaları
Jamaika
Kanada
Kostarika
Küba
Martinique
Meksika
Montserrat
Nikaragua
Panama
Porto Riko
Saint Barthélemy
Saint Kitts ve Nevis
Saint Lucia
Saint Martin
Saint Pierre ve Miquelon
Saint Vincent ve Grenadines
Sint Maarten
Trinidad ve Tobago
Turks ve Caicos Adaları
Virjin Adaları
Common.Footer.ValueProp.Image.AltText

Revit için Tasarım Uygulaması

Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

  • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
  • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
  • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin