Publiko produktet
Low Profile Series Fan Powered Terminal Unit - Hot Water Reheat - FCL-600
METALAIRE

Low Profile Series Fan Powered Terminal Unit - Hot Water Reheat - FCL-600

The Metalaire model FCL-600 low profile series fan-powered terminal unit has been engineered to provide a balance between quiet operation, minimal footprint, and a broad flow range with a reduced height for low clearance ceiling applications. Every FCL includes a bottom rigid access panel. These simple-to-remove panels provide access to allow trouble-free maintenance of the fan motor and blower assembly. Optional electronically commutated motors (ECM) are available to minimize energy usage. 

  • Capacities ranging from 340-1,800 CFM in 2 casing sizes
  • Reduced height for low clearance applications
  • AHRI Certified, ETL listed, UL 1995,  Complies with NFPA 90A and UL 181
  • Hot Water or Electric Heat available for reheat applications
Özellikler
    • Single speed high efficiency PSC motor with SCR motor speed control
    • Field adjustable baffles, top and bottom, for balancing
    • Large bottom access panel provided for easy motor/blower servicing
    • Damper rotates in a self-lubricating, long life, low friction thermoplastic bearing
    • Industry leading continuous welded primary inlet duct to minimize leakage with three stiffening beads for added rigidity
    • Mechanically fastened damper assembly shall be double layer, 18 gauge equivalent, galvanized steel with integral blade seal (<1% at 3.0" wg static pressure)
    • All metal constructed inlet flow sensor with extra balancing taps
    • NEMA 1 rated control enclosure with stand-off to prevent penetration of casing
    • Full range of options and accessories available including liners, heating coils, access doors, attenuators, etc.
    • All FCL-600 terminal units are AHRI certified and shipped with the AHRI seal

    Liners

    • ½” 1.5lbs fiberglass
    • ¾” 1.5lbs foil faced
    • ½” or 1” Thermopure closed cell foam

    Access Doors

    • Damper
    • Motor/Blower
    • Inlet sensor
    • Hot water coil
    • Electric heat

    Other options available:

    • 5 different control enclosures
    • 4 different handing configurations
    • 3 different outlet connections 
    • Hanger brackets
    • 4 different transformers
    • ECM Motors
    • Multiple how water coil options
    • Multiple electric heat options
    • Custom options


Teknik özellikler
  • Benzersiz ref.Low-Profile-Series-Fan-Powered-Terminal-Unit-Hot-Water-Reheat-FCL-600
  • Ürün ailesiAir Terminal Units
  • Ürün grubuFan Powered Air Terminal Units - Constant Volume
  • TipObje (Tekil Nesne)
  • Yayınlanma tarihi2019-04-09
  • Baskı numarası1
İlgili
  • Ana malzemeÇelik
  • İkincil malzemeAlüminyum
  • Tasarım yeriBirleşik Devletler
  • Üretim yeriBirleşik Devletler
Sınıflandırma
  • BIMobject kategorisiHVAC - Mekanik Havalandırma
  • IFC sınıflandırmasıHava Terminali
  • UNSPSC adıAir diffusers
  • UNSPSC kodu40101505
  • Uniclass 2015 koduPr_70_65_04_02
  • Uniclass 2015 açıklamasıAir diffusers
  • CSI MasterFormat 2014 kodu23 37 13
  • CSI MasterFormat 2014 başlığıDiffusers, Registers, and Grilles
  • OmniClass numarası23-33 49 11 11
  • OmniClass başlığıCeiling Ventilation Diffusers
  • CSI UniFormat II koduD30
  • CSI UniFormat II başlığıHVAC

Bölge bulunurluk durumu

Kuzey Amerika
Birleşik Devletler
Kanada
Meksika
Common.Footer.ValueProp.Image.AltText

Revit için Tasarım Uygulaması

Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

  • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
  • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
  • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin