Publiko produktet
KESSEL-Oil/fuel separator EasyOil ground, NS 20, class II, 5800 l, B

KESSEL-Oil/fuel separator EasyOil ground, NS 20, class II, 5800 l, B

Oil-/fuel separator EasyOil ground NS 20, class II Cover class A/B Installation • Installation is possible with groundwater up to the upper edge of the tank (UET) • A load distribution plate must be planned for class D • Class D = 700 mm = DEC = 1500 mm Class A/B = 700 mm = DEC = 1800 mm Consisting of: Upper sections made of polymer, continuous height and level adjustment, tiltable to 5°, with covers class A/B, D according to EN 124 in cast iron (can be driven over by cars and trucks), incl. lift-out key. Inlet and outlet Ø ... for synthetic material pipes in: PE-HD (according to EN 12666-1); PVC pipe (according to EN 1401-1); PP or AS. Note: • Suitable for filling stations with high-performance filling pumps, E10 and biodiesel fuels • Choose separator size and article number from table below. Contact KESSEL for separator sizing support if required Accessories: Sampling chamber for underground installation, extension section for deep installation, alarm units for when the maximum oil level is reached and there is a back-up of water (required according to EN 858 Part 1), oil and sludge suction system, coalescence filter insert for retrofitting to the coalescence separator, SonicControl page 359 – 361; pumping stations see chapter "3" Technical note page 356 • Certification-Number. Z-54.2-453 • Nominal Size: NS 20 • Sludge trap content: 4.000 Litres • Total capacity: 5.800 Litres • Oil storage volume: 380 Litres • Inlet/outlet: DN 200 (DA 200 mm) • Weight: ca. 600 kg • Installation depth D : 870 - 1.250 mm • Dimensions: • Length: 3.060 mm • Width: 1.760 mm • Height: 1.630 mm + T Load Class B 125 (12.5 ton) -Not upgradable to Class I coalescence separator -Fully water tight from base to top of manhole cover -20 year guarantee on polyethylene (PE) material -Suitable for gas station use with high flow gas pumps -Resistant and suitable for bio-diesel use (FAME) up to 100% -According to EN 858-1 oil / fuel separators to be equipped with self actuating alarm system Delivery: fully assembled Delivery date: contact factory
Özellikler
  • • Coverage features • Cover type: cover plate • Cover material: cast iron • Cover color: black • Load class: B 125 (EN 124) • Length: 648 mm • Width: 648 mm • Tightness: odor and surface water tight • Height: 95 mm • Lock: unlocked • Dimensions • Max. Length: 3,460 mm • Insertion dimension length: 3,110 mm • Loading dimension, width: 1,760 mm • T-TEÜ: 180 mm • TEÜ: 700-1,800mm • Waste water content • Total volume: 5,800 l • Sludge trap capacity: 4,000 l • Storage volume of light liquid: 470 l • general characteristics • Material: PE • Standard: EN 858, DIN 1999-100, DIN 1999-101 • execution • Disposal type: manual with suction hose • Coalescence use: no • Nominal size (NS): 20 • container • Outlet nominal diameter (DA): 200 • Outlet nominal diameter (DN): 200 • Distance pipe bottom inlet to tank bottom: 1,630 mm • Distance pipe bottom outlet to tank bottom: 1,600 mm • Inlet / outlet connection: PE-HD pipes according to DIN 19537, PVC-KG pipes according to DIN 19534, PP or AS • Installation depth: 870-1,250mm • Groundwater resistance from the lower edge of the bottom part: 1,810 mm • Clear entry width (LW): 600 mm • Inlet nominal diameter (DA): 200 mm • Inlet nominal diameter (DN): 200 mm • control • Switching device: no • Other features • Separator class: System B (formerly class II) • Type of height adjustment: telescopic top section, tiltable by 5 degrees • Delivery condition: ready for installation (connecting parts must be connected on site) • Installation situation: installation in the ground • Gross weight: 595 kg • Net weight: 595 kg • Approval: Z-83.8-55 • Proof of conformity: Z-83.8-55 • Overhang: 130 mm
Teknik özellikler
  • Benzersiz ref.99620-80B
  • Ürün ailesiClass II cistern (Light liquid separators)
  • Ürün grubuSeparation technology - Standard products
  • TipObje (Tekil Nesne)
  • Yayınlanma tarihi2021-03-19
  • Baskı numarası1
  • Yükseklik (mm)1630
  • Genişlik (mm)1760
  • Derinlik (mm)3060
Bağlantılar
İlgili
  • Ana malzemePolietilen
  • İkincil malzemeCast iron
  • Tasarım yeriAlmanya
  • Üretim yeriAlmanya
  • Ağırlık net (Kg)600
Sınıflandırma
  • BIMobject kategorisiSıhhi tesisat - Drenaj
  • IFC sınıflandırmasıNesne

Bölge bulunurluk durumu

Avrupa Asya Kuzey Amerika Afrika Güney Amerika Okyanusya
Åland
Afganistan
Anguilla
Angola
Arjantin
Amerikan Samoası
Almanya
Azerbaycan
Antigua ve Barbuda
Batı Sahara
Bolivya
Avustralya
Andorra
Bahreyn
Aruba
Benin
Brezilya
Cook Adaları
Arnavutluk
Bangladeş
Bahamalar
Botswana
Ekvador
Fiji
Avusturya
Bhutan
Barbados
Burkina Faso
Falkland Adaları (Islas Malvinas)
Fransız Polinezyası
Belçika
Birleşik Arap Emirlikleri
Belize
Burundi
Fransız Guyanası
Guam
Beyaz Rusya
British Indian Ocean Territory
Bermuda
Çad
Guyana
Kiribati
Bosna Hersek
Brunei Sultanlığı
Birleşik Devletler
Cape Verde
Kolombiya
Kuzey Mariana Adaları
Bulgaristan
Christmas Adası
Caribbean Netherlands
Cezayir
Paraguay
Marshall Adaları
Cebelitarık
Çin
Cayman Adaları
Cibuti
Peru
Mikronezya Federal Devletleri
Çek Cumhuriyeti
Cocos Adaları
Curaçao
Comoros
Şili
Nauru
Danimarka
Endonezya
Dominik
Demokratik Kongo Cumhuriyeti
Surinam
New Caledonia
Estonya
Ermenistan
Dominik Cumhuriyeti
Ekvator Ginesi
Uruguay
Niue
Faroe Adaları
Filipinler
El Salvador
Eritre
Venezuela
Norfolk Adası
Finlandiya
Filistin
Grenada
Esvatini̇
Palau
Fransa
Güney Kore
Grönland
Etiyopya
Papua Yeni Gine
Guernsey
Gürcistan
Guadeloupe
Fas
Pitcairn Adaları
Hırvatistan
Hindistan
Guatemala
Fildişi Sahili
Samoa
Hollanda
Hong Kong
Haiti
Gabon
Solomon Adaları
İngiltere
Irak
Honduras
Gambiya
Timor-Leste
İrlanda
İran
İngiliz Virjin Adaları
Gana
Tokelau
Isle of Man
İsrail
Jamaika
Gine
Tonga
İspanya
Japonya
Kanada
Guinea-Bissau
Tuvalu
İsveç
Kamboçya
Kostarika
Güney Afrika
United States Minor Outlying Islands
İsviçre
Katar
Küba
Güney Sudan
Vanuatu
İtalya
Kazakistan
Martinique
Kamerun
Wallis ve Futuna
İzlanda
Kırgızistan
Meksika
Kenya
Yeni Zelanda
Jersey
Kuveyt
Montserrat
Kongo
Karadağ
Kuzey Kore
Nikaragua
Lesotho
Kıbrıs
Laos
Panama
Liberya
Kuzey Makedonya
Lübnan
Porto Riko
Libya
Letonya
Macau
Saint Barthélemy
Madagaskar
Liechtenstein
Maldivler
Saint Kitts ve Nevis
Malavi
Litvanya
Malezya
Saint Lucia
Mali
Lüksemburg
Moğolistan
Saint Martin
Mauritius
Macaristan
Myanmar (Burma)
Saint Pierre ve Miquelon
Mayotte
Malta
Nepal
Saint Vincent ve Grenadines
Mısır
Moldova
Özbekistan
Sint Maarten
Moritanya
Monako
Pakistan
Trinidad ve Tobago
Mozambik
Norveç
Singapur
Turks ve Caicos Adaları
Namibya
Polonya
Sri Lanka
Virjin Adaları
Nijer
Portekiz
Suriye
Nijerya
Romanya
Suudi Arabistan
Orta Afrika Cumhuriyeti
Rusya
Tacikistan
Reunion
San Marino
Tayland
Ruanda
Sırbistan
Tayvan
Saint Helena
Slovakya
Türkiye
São Tomé ve Príncipe
Slovenya
Türkmenistan
Senegal
Svalbard
Umman
Seychelles
Ukrayna
Ürdün
Sierra Leone
Vatikan
Vietnam
Somali
Yunanistan
Yemen
Sudan
Tanzanya
Togo
Tunus
Uganda
Zambiya
Zimbabwe
Common.Footer.ValueProp.Image.AltText

Revit için Tasarım Uygulaması

Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

  • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
  • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
  • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin