Publiko produktet
119 gallon storage tank
119 gallon storage tank

    119 gallon storage tank

    Residential / commercial glass-lined 119G storage tank

    Özellikler
    • Construction
      The tank shall be manufactured from mild steel with
      a baked on Cobalt enriched porcelain glass lining
      Tank outer shell shall be steel with a baked on
      powder coating for protection
      The ECO-119GLBB Tank is only certified for Indoor
      installation, it should not be located external to the building
      Insulation
      2" of High R value foam insulation will be sprayed on to the
      bare shell of the tank to reduce heat loss
      Connections
      Connections to the Hot and Cold building supplies shall be
      1 1/2" NPT Female type
      Connections to the Hot and Cold piping to the Heat Pump
      shall be 3/4" NPT Female type
      Cold Water Piping from Storage Tank to Heat Pump
      and return of Hot Water piping from Heat Pump to Tank
      shall be 1/2" Copper or PEX.
      2 of 4" long 3/4" Male x 3/4" Male connections will be boxed
      which shall be located at the base of the ECO-119GLBB
      2 x Magnesium anode rods shall be installed internally
      Controls
      The tank shall be supplied with a Temperature sensor
      installed in a sensor well to control the GS5-45HPC & -D
      Additional GS Heat Pumps connected to a tank shall
      require an individual Temperature sensor
      Tank Sensor wiring to the GS Heat Pump will be 18-2AWG
      Two additional Thermowells are supplied with the Tank at
      the Top and Bottom levels of the Tank so that a Controller
      to provide Demand Response signals can be used
      Pressure and Temperature Relief
      Tank shall be supplied with a factory installed
      ASME certified Pressure and Temperature Relief valve
      Settings shall be at 150 Psig for Presssure and
      210°F for Temperature


    Teknik özellikler
    • Benzersiz ref.119-gallon-storage-tank
    • Ürün ailesiResidential Tanks
    • Ürün grubuECO-119GLBB
    • TipObje (Tekil Nesne)
    • Yayınlanma tarihi2025-09-05
    • Baskı numarası1
    • Yükseklik (inç)63.57
    • Genişlik (inç)28
    • Derinlik (inç)28
    İlgili
    • Ana malzemeKarbon Çelik
    • İkincil malzemeCam Granulleri
    • Tasarım yeriBirleşik Devletler
    • Üretim yeriBirleşik Devletler
    • Ağırlık net (Lbs)345
    Sınıflandırma
    • BIMobject kategorisiHVAC - Water heaters
    • IFC sınıflandırmasıElektrikli Isıtıcı
    • ETIM KoduEG000043
    • ETIM AdıResidential heating
    • Uniclass 2015 koduPr_60_60_96
    • Uniclass 2015 açıklamasıWater heaters
    • CSI MasterFormat 2014 kodu22 33 36.16
    • CSI MasterFormat 2014 başlığıCommercial Storage Electric Domestic Water Heaters
    • OmniClass numarası23-31 29 00
    • OmniClass başlığıHot Water Heaters

    Bölge bulunurluk durumu

    Kuzey Amerika
    Anguilla
    Antigua ve Barbuda
    Aruba
    Bahamalar
    Barbados
    Belize
    Bermuda
    Birleşik Devletler
    Caribbean Netherlands
    Cayman Adaları
    Curaçao
    Dominik
    Dominik Cumhuriyeti
    El Salvador
    Grenada
    Grönland
    Guadeloupe
    Guatemala
    Haiti
    Honduras
    İngiliz Virjin Adaları
    Jamaika
    Kanada
    Kostarika
    Küba
    Martinique
    Meksika
    Montserrat
    Nikaragua
    Panama
    Porto Riko
    Saint Barthélemy
    Saint Kitts ve Nevis
    Saint Lucia
    Saint Martin
    Saint Pierre ve Miquelon
    Saint Vincent ve Grenadines
    Sint Maarten
    Trinidad ve Tobago
    Turks ve Caicos Adaları
    Virjin Adaları
    Common.Footer.ValueProp.Image.AltText

    Revit için Tasarım Uygulaması

    Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

    Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

    • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
    • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
    • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin