Publiko produktet
RO-E - Reverse Osmosis System
RO-E - Reverse Osmosis System
RO-E - Reverse Osmosis System

    RO-E - Reverse Osmosis System

    Improved water quality for efficient and hygienic humidification

    Reverse osmosis (RO) is an effective and economic way of removing minerals from water. The Condair RO-E has been developed specifically to provide operational, energy and maintenance benefits to Condair humidifiers.

    By removing the minerals from a humidifier’s supply water, the limescale that builds-up in the system is virtually eliminated. This results in a much lower level of required maintenance in all types of humidifier and reduced energy consumption in steam humidifiers.

    Steam humidifiers that run on mains water need to drain their boiling chambers occasionally to maintain a low mineral content and reduce limescale build-up. By using RO supply water, the steam humidifier’s boiling chamber does not require this regular drain. Therefore it uses less energy to maintain the water’s temperature.

    As the water temperature is consistent, the steam output is also consistent, thus improving humidity control. By using resistive steam humidifiers fed by RO water, ±1%RH control can be achieved.

    Other benefits of using RO water with humidifiers include increasing the life of the evaporative pads in evaporative humidifiers and preventing dust carry-over in spray humidifiers.

    Özellikler
    • Condair RO-E

      • Voltage: 120V
      • Frequency: 60 Hz


      Version:

      • Version + is for use with adiabatic humidifiers.
      • Models with safety valve are mandatory for CE markets. Note: RO-E 200 and 300 require the safety valve by the external pressure tank. Please consider the instruction in the installation manual!

      RO-E 40

      Pure water output at 41 °F water temperature against 14.5 psi: 15.3 USgal/hr

      Pure water output at 59 °F water temperature against 14.5 psi: 25.9 USgal/hr


      RO-E+ 40 (for adiabatic humidifiers)

      Pure water output at 41 °F water temperature against 14.5 psi: 9.5 USgal/hr

      Pure water output at 59 °F water temperature against 14.5 psi: 15.6 USgal/hr


      RO-E 100

      Pure water output at 41 °F water temperature against 14.5 psi: 27.8 USgal/hr

      Pure water output at 59 °F water temperature against 14.5 psi: 47.8 USgal/hr


      RO-E+ 100 (for adiabatic humidifiers)

      Pure water output at 41 °F water temperature against 14.5 psi: 17.7 USgal/hr

      Pure water output at 59 °F water temperature against 14.5 psi: 30.1 USgal/hr


      RO-E 200

      Pure water output at 41 °F water temperature against 14.5 psi: 52.8 USgal/hr

      Pure water output at 59 °F water temperature against 14.5 psi: 93 USgal/hr


      RO-E+ 200 (for adiabatic humidifiers)

      Pure water output at 41 °F water temperature against 14.5 psi: 32.8 USgal/hr

      Pure water output at 59 °F water temperature against 14.5 psi: 57.6 USgal/hr


      RO-E 300

      Pure water output at 41 °F water temperature against 14.5 psi: 75.3 USgal/hr

      Pure water output at 59 °F water temperature against 14.5 psi: 135.5 USgal/hr


      RO-E+ 300 (for adiabatic humidifiers)

      Pure water output at 41 °F water temperature against 14.5 psi: 45.2 USgal/hr

      Pure water output at 59 °F water temperature against 14.5 psi: 82.4 USgal/hr

      Teknik özellikler
      • Benzersiz ref.condair-usa-ca-ro-e
      • Ürün ailesiWater Treatment
      • Ürün grubuReverse Osmosis
      • TipObje (Tekil Nesne)
      • Yayınlanma tarihi2025-12-16
      • Baskı numarası1
      • Yükseklik (inç)31.2
      • Genişlik (inç)23.1
      • Derinlik (inç)19.1
      İlgili
      • Ana malzemeToz Kaplama Çelik
      • Tasarım yeriİsviçre
      • Üretim yeriAlmanya
      Sınıflandırma
      • BIMobject kategorisiHVAC - HVAC (Isıtma Havalandırma İklimlendirme)
      • IFC sınıflandırmasıFiltre
      • Uniclass 2015 koduPr_60_55_97_72
      • Uniclass 2015 açıklamasıReverse osmosis units
      • OmniClass numarası23-27 55 29 19
      • OmniClass başlığıReverse Osmosis Units

      Bölge bulunurluk durumu

      Kuzey Amerika
      Birleşik Devletler
      Kanada
      Common.Footer.ValueProp.Image.AltText

      Revit için Tasarım Uygulaması

      Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

      Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

      • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
      • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
      • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin