Publiko produktet
ARDEX AF 2525 - Heavy Duty Adhesive - Two Component
ARDEX AF 2525 - Heavy Duty Adhesive - Two Component
    ARDEX

    ARDEX AF 2525 - Heavy Duty Adhesive - Two Component

    ARDEX AF 2525 is ideal for installing all types of vinyl, rubber, dense non-absorbent backed floorcoverings, some timber floorcoverings, and exterior floorcoverings such as artificial grass.  It can be can be used with all ARDEX Latex and Water-Based Levelling and Smoothing Compounds in both commercial and domestic internal and external locations.

    • Moisture, weather and water resistant
    • Suitable for internal and external use
    • High temperature resistance, for use in areas of direct sunlight e.g. conservatories
    • Very high bond strength, for use in high load areas
    • Easy to mix and apply
    • Very low emissions
    • Solvent free

    Unit Size Available: 6kg

    Coverage: Up to 20m2

    ARDEX ENDURA

    Özellikler
    • Airing Time
      The time the adhesive must be left open before applying the floorcovering.
      Between 0-5 minutes*

      Working Time
      The time in which the adhesive can receive the floorcovering, after the initial airing time.
      Up to 70 minutes*

      Open Time
      The combination of airing and working time.
      Up to 75 minutes*

      *depending on the absorbency of the subfloor
      and ambient conditions, (20°C & 65% RH).

    Teknik özellikler
    • Benzersiz ref.Ardex-af-2525
    • Ürün ailesiFlooring Adhesive
    • Ürün grubuHeavy Duty Adhesive
    • TipObje (Tekil Nesne)
    • Yayınlanma tarihi2019-08-26
    • Baskı numarası1
    İlgili
    • Ana malzemePoliüretan
    • Tasarım yeriİngiltere
    • Üretim yeriİngiltere
    Sınıflandırma
    • BIMobject kategorisiZemin Kaplama - Döşeme
    • IFC sınıflandırmasıFloor
    • UNSPSC adıFlooring
    • UNSPSC kodu301617
    • Uniclass 2015 koduEF_30_20
    • Uniclass 2015 açıklamasıFloors
    • CSI MasterFormat 2014 kodu09 60 00
    • CSI MasterFormat 2014 başlığıFlooring
    • OmniClass numarası23-15 17 00
    • OmniClass başlığıFloor Coverings
    • CSI UniFormat II koduC3020
    • CSI UniFormat II başlığıFloor Finishes

    Bölge bulunurluk durumu

    Avrupa Okyanusya
    İngiltere
    Yeni Zelanda
    İrlanda
    Common.Footer.ValueProp.Image.AltText

    Revit için Tasarım Uygulaması

    Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

    Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

    • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
    • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
    • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin