Publiko produktet
WPM 002 - Two component undertile waterproofing membrane
ARDEX ENDURA

WPM 002 - Two component undertile waterproofing membrane

WPM 002 is a tough, fast drying two component waterproofing membrane specifically designed for use under tiles. WPM 002 is based on the most advanced acrylic polymer technology, and is totally resistant to re-emulsification. It is flexible, low in odour, and is fully compatible with polymer modified tile adhesives with fast drying properties to enable tiling in 16 - 24 hours. The product has been uniquely formulated with synthetic microfibers to increase its strength and eliminate the need for a separate reinforcement mat.
Özellikler
  • Characteristics of mixed product Mixing Ratio: 1:1 by weight Mixed density: 1.4 kg/litre Mixed solid content (ASTM D 1644): 75 % Colour: light grey/green Characteristics of cured membrane Shore A hardness (ASTM D2240) Dry film: 85 - 90 Elongation at Break (AS1145): 332 % @ 7 days Crack Bridging capacity (ASTM C 1305): No cracks @ 1.6 mm Tensile Strength (AS 1145) Dry: 1.7 MPa @ 7 days Full Cure: 2.9 MPa @ 28 days Adhesion to cement substrate with primer (ASTM D 4541): > 1.0 N/mm2 Tear strength (ASTM D 1004): 0.40 N/mm2 Water Absorption (ASTM D 5147): 1.60 % Acceptance of cyclic movement (ASTM C 1305): Pass (10 cycles) VOC content: 25 g/L
Teknik özellikler
  • Benzersiz ref.WPM-002
  • Ürün ailesiWaterproofing Systems
  • Ürün grubuLIQUID APPLIED WATERPROOFING
  • TipObje (Tekil Nesne)
  • Yayınlanma tarihi2020-01-06
  • Baskı numarası1
İlgili
  • Ana malzemeAkrilik
  • İkincil malzemeCementitious
  • Tasarım yeriHindistan
  • Üretim yeriHindistan
Sınıflandırma
  • BIMobject kategorisiİnşaat Malzemeleri - Waterproofing & Membranes
  • IFC sınıflandırmasıFloor
  • UNSPSC adıStone or tile flooring
  • UNSPSC kodu30161706
  • Uniclass 2015 koduPr_20_31_02_89
  • Uniclass 2015 açıklamasıTile adhesives
  • CSI MasterFormat 2014 kodu09 60 00
  • CSI MasterFormat 2014 başlığıFlooring
  • OmniClass numarası23-13 25 17
  • OmniClass başlığıWaterproofing
  • CSI UniFormat II koduC3020
  • CSI UniFormat II başlığıFloor Finishes

Bölge bulunurluk durumu

Asya
Hindistan
Common.Footer.ValueProp.Image.AltText

Revit için Tasarım Uygulaması

Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

  • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
  • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
  • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin