Publiko produktet
Lightweight Stainless Steel Double Check Valve Assemblies with Integral Butterfly or OSY Shutoffs - Deringer 20/20G
Lightweight Stainless Steel Double Check Valve Assemblies with Integral Butterfly or OSY Shutoffs - Deringer 20/20G

    Lightweight Stainless Steel Double Check Valve Assemblies with Integral Butterfly or OSY Shutoffs - Deringer 20/20G

    Ames Deringer™ 20 and 20G Double Check Valve Assemblies are designed to prevent non-health hazard pollutants from entering the potable water supply system caused by backpressure and/or backsiphonage conditions. Deringer 20 features integral Eccentric-seal™ butterfly shutoff valves for a short lay length, and Dual-action™ checks for high performance at low- and high-flow rates. Deringer 20G also features Dual-action checks, but with OS&Y shutoff valves.

    Either may be installed under continuous pressure service to protect against both backpressure and backsiphonage. Maximum working pressure: 175psi (12 bar).


    Özellikler
    • Features

      • Integral shutoffs for shorter lay length and lightweight construction (Deringer 20 only)
      • Tamper-resistant test cocks
      • Dual-action check module for low- and high-flow performance
      • Prewired supervisory switches (Deringer 20 only)
      • Bow-seal™ full access cover for lower weight and easy access to valve internals
    Teknik özellikler
    • Benzersiz ref.deringer-20-20g-backflow-preventer
    • Ürün ailesiPlumbing & Flow Control Solutions
    • Ürün grubuBackflow Prevention
    • TipObje (Tekil Nesne)
    • Yayınlanma tarihi2020-03-10
    • Baskı numarası1
    İlgili
    • Ana malzemeBronze
    • Tasarım yeriBirleşik Devletler
    • Üretim yeriBirleşik Devletler
    Sınıflandırma
    • BIMobject kategorisiSıhhi tesisat - Valfler
    • IFC sınıflandırmasıValf
    • UNSPSC adıValves
    • UNSPSC kodu401416
    • Uniclass 2015 koduPr_65_54_40_13
    • Uniclass 2015 açıklamasıCheck valves
    • CSI MasterFormat 2014 kodu40 05 65
    • CSI MasterFormat 2014 başlığıValves for Pump Control and Check Service
    • OmniClass numarası23-27 31 19
    • OmniClass başlığıCheck Valves
    • CSI UniFormat II koduC1030
    • CSI UniFormat II başlığıFittings

    Bölge bulunurluk durumu

    Kuzey Amerika
    Birleşik Devletler
    Kanada
    Common.Footer.ValueProp.Image.AltText

    Revit için Tasarım Uygulaması

    Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

    Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

    • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
    • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
    • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin