1822 - 1832 _ G3/4" or G1" NINO Manifold with ball valve, connections G1/2"x16

Distribution manifolds (NINO) are generally used in distribution networks for hot and cold water.
Thanks to their configuration they allow the parallel supply of utilities for hot water and/or cold water, thereby reducing load losses to a minimum. The manifolds are produced in conformity with the relative regulations and are certified for their chemical composition of the used materials and on a dimensional level.

Modular manifold in brass with ball valve with T-handle red/blue

Wide range available, for any installation requirement from 2÷4 ways
Size G3/4" (DN20) or G1" (DN25)
Connections G1/2”x16

Also available in the following versions:
Art.1822 size G3/4" (DN20)^**
Art.1832 size G1" (DN25)^{**
** also available in nickel plated version}

Production range:
Art.1822RCP - 1832RCP with connections G1/2” flat seat, phased thread and sealing gasket
Art.1822SH with connections G1/2”x15
Art.1842 with connections for Pe-X pipe 16mm

Related products:
Art.0200 High density Pe-X pipe with anti-oxygen barrier (EVOH)
Art.1716 Press fitting for Pe-X pipe with connections G1/2"x16 and G3/4”x18 (Euroconus)
Art.1435 Compression fitting for Pe-X pipe with connections G1/2"x16

Art.0600 Pe-X pipe with Aluminium coil
Art.1666 Press fitting for multi-layer pipes with connections G1/2”x16 (Eurocono)
Art.1635 Compression fitting with multi-layer pipe with connections G1/2"x16

Art.1812 Universal box

Art.1939 Box adjustable in height and width