SHIFT PRO

URBAN LIGHTING

S.1490W
1 module LED 3000K 220-240Vac DIMMABLE DALI2; PUSH

Rated module luminous flux:: 4240lm
Rated luminaire luminous flux: : 2108lm
Rated module power: : 27W
Rated luminaire power: : 30.4W
Luminaire efficacy: : 69lm/W
Voltage (AC): : 220-240Vac
Frequency (AC): : 50/60Hz
Voltage (DC): : 170-276Vdc (No PUSH DIM)
Dimmable: : DALI2; PUSH
PUSH Synchronization:
- Max 4 Luminaires, distance <15m;
- Max 35 Luminaires, distance <300m with S.2490 accessory.
Electrical insulation class: : II
Protection class IP: : IP66
Mechanical resistance: : IK10
CE

SPECIAL VERSION ON REQUEST: this Luminaires can be supplied with a surcharge in class III (without power supply). Requires working remote power supply in costant current at 800mA Vfmin=31Vdc Vfmax=36Vdc.

LUMINAIRE TYPE
Bollard fitting / Urban luminaire. IP rating IP 66
MATERIAL CHARACTERISTICS
Aluminium die cast housing in EN AB-44300 (low copper content) and extruded EN AW-6060 with high resistance against corrosion. Stone wash surface treatment prior to painting process. Stainless steel Allen screws with insulating treatment against galvanic corrosion. Pre treated Silicone Gaskets.
Extra-resistant Painting Process:
Extra-resistant exterior coating. Product suitable for applications in high-humidity environments, C5 ZONE (according to UNI EN ISO 9223:2012).
Mechanical resistance IK 10
LIGHTING PERFORMANCE
Each spotlight is housed inside a head that can be controlled independently and freely rotated on its axis. Through fixing grains, it can be locked in the desired position. Spotlights integrated in the head can, in turn, be tilted up to a maximum of 90º horizontally and direct the beam downwards or be pushed forward to cover longer distances. The head can also be turned upside down. This additional degree of freedom allows to also direct the beam upwards so to light up, as example, a walkway and an adjacent wall with the same fitting. Version with 20° optics equipped with a honeycomb filter.
INSTALLATION AND MAINTENANCE
Shift Pro enables the creation of multifunction configurations by combining the available heads: spotlight, IP65 passive acoustic speaker, IP67 security camera, housing-ready head for an external camera, terminal head prepared for a Wi-Fi access point, or blank head for product height alignment. Depending on project requirements, up to five heads can be installed on 3000 mm (S.1484 o S.1485) or 4000 mm (S.1486 o S.1487) poles, and up to two heads on the 500 mm pole (S.1483). This modularity makes it ideal for lighting, security, and smart management of urban public spaces, shopping centers, and private environments.
WIRING
Supply 0.2m cable section type H05RN-F . Single cable entry sealed with B component epoxy resin, wired internally protected by silicon sheaths. Isolation: CLASS II . Available colours: Black (cod.09), Anthracite grey (cod.24). Weight: 31.12 Kg Glow Wire test: 850°C
LED module included
SHIFT PRO PATENTED and REGISTERED DESIGN
This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.This product contains a light source of energy efficiency class (EPREL - European Product Registry for Energy Labelling): E.
LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire min. 70.000 hours Ta 25°C, min. 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

ELECTRONIC EQUIPMENT SENSITIVE TO OVERVOLTAGE.We recommend installing surge protection devices "SPD" in the electrical system. Protection devices prevent the intensity of these phenomena’s, protecting the appliances from the risk of being damaged and extending the lifespan. Outdoor luminaires are subject to all types of permanent, temporary, or transient electrical disturbances. Such disturbances can create permanent damage or failure affecting its performance and durability. The surge protection device (supplied by SIMES) is utilized to limit the destructive effect of these phenomena. We suggest that each luminaire must be connected to one protection device at not more than 10m away. For correct coordination of the protections, a surge protection device must also be provided inside the electrical panel of the system (the selection of this device must be carried out from the electrical designer and is not supplied by SIMES).

WARRANTY
All items produced from 01/01/2026 onwards are covered by a 5 (five)-year warranty against manufacturing and conformity defects, in accordance with the terms and limits set out in the manufacturer’s official documentation. For full details, exclusions and warranty activation procedures, please refer to the following link: www.simes.it/warranty