Round Retrofit Terminal - RT-500

• Control components are shipped piped and wired
• Recommended for use in duct systems with static pressure up to 3" water gauge
• RT-500 is available in six sizes from 6" to 16" to handle 80 CFM – 4,200 CFM.
• 22 ga. galvanized steel casing, mechanically sealed, low leakage construction.
• Mechanically fastened damper assembly shall be double layer, 18 gauge equivalent, galvanized steel with integral blade seal (<1% at 3.0" wg static pressure).
• Optional factory calibrated job-specific controls.
• Multi-quadrant, averaging flow sensor for highly accurate (+/-5%) flow readings with varying inlet duct configurations after certified balancer has balanced terminal.
• Easily accessible, steel balancing taps.
• External control cabinet with offset mounting plate as standard.
• RT-500 has beaded inlet and discharge for added rigidity and aids in secure flex duct connections

Options available:

• Custom options