เผยแพร่สินค้าของคุณ
5T00.11 MALE TEE
General Fittings

5T00.11 MALE TEE

Press fittings for multilayer pipe of line SAFE_PRESS are equipped with LEAK BEFORE PRESS (LBP) system to detect water leak when the fitting is not pressed. This allows the plumber to easily detect the improper installation and eventually react promptly. The “leak before press” function guarantees greater safety and time savings during installation. Fittings are suitable for cold or hot water supply for sanitary or heating systems, and for any kind of sanitary installation such as domestic, commercial, industry and farming and with non-aggressive fluids. The geometry of the fitting allows an excellent coupling between pipe and fitting after pressing and the plastic insulation ring windows allow to check the correct insertion of the pipe. Two O-rings guarantee the seal and reliability over time. Fitting body is made of brass, while the sleeve is made of AISI 304 stainless steel. Since the connecting type is irreversible (it is not possible to disassemble), it is possible to place the fittings concealed, taking care of protecting it from non-suitable materials.
สเปคสินค้า
  • “Leak Before Press” function for extra safety Multitool Plastic insulation ring to prevent electrolytic corrosion, and with windows to check the correct insertion of pipe Double O-Ring DVGW and OVGW certified Raw materials complying with UBA LIST ISO 7/1 threads Efficient installation: double wallplate elbow allows to make installations in series or rings for a better distribution and change of water Product traceability guaranteed by the date stamped on the body of the fitting
สเปคสินค้าด้านเทคนิค
  • Unique ref.5t00-11-male-tee
  • Product familyMultilayer pipe systems
  • กลุ่มผลิตภัณฑ์LINE 5T00
  • ประเภทวัตถุ (วัตถุชิ้นเดียว)
  • วันที่เผยเเพร่2026-03-10
  • หมายเลขฉบับ1
การจำแนกประเภท
  • หมวดหมู่ BIMobjectประปา - ข้อต่อ
  • IFC classificationPipe Fitting
  • OmniClass Number23-27 43 00
  • OmniClass TitlePipe Fittings

พื้นที่การขาย

ยุโรป เอเชีย แอฟริกา อเมริกาใต้
กรีซ
กัมพูชา
กานา
โคลอมเบีย
เกาะไอล์ออฟแมน
กาตาร์
กาบอง
ชิลี
เกิร์นซีย์
เกาหลีใต้
กินี
ซูรินาเม
โครเอเชีย
เกาหลีเหนือ
กินี-บิสเซา
บราซิล
เจอร์ซีย์
เกาะคริสต์มาส
แกมเบีย
โบลิเวีย
เช็กเกีย
คาซัคสถาน
โกตดิวัวร์
ปารากวัย
ซานมาริโน
คีร์กีซสถาน
คองโก
เปรู
เซอร์เบีย
คูเวต
คองโก
เฟรนช์เกียนา
ไซปรัส
จอร์เจีย
คอโมโรส
เวเนซุเอลา
เดนมาร์ก
จอร์แดน
เคนยา
สาธารณรัฐสหกรณ์กายอานา
นครรัฐวาติกัน
จีน
เคปเวิร์ด
หมู่เกาะฟอล์กแลนด์
นอร์เวย์
ซาอุดีอาระเบีย
แคเมอรูน
อาร์เจนตินา
เนเธอร์แลนด์
ซีเรีย
จิบูตี
อุรุกวัย
บอสเนียและเฮอร์เซโกวีนา
ญี่ปุ่น
ชาด
เอกวาดอร์
บัลแกเรีย
ตุรกี
ซิมบับเว
บาร์เบโดส
เติร์กเมนิสถาน
ซูดาน
เบลเยียม
ไต้หวัน
เซเชลส์
โปรตุเกส
ทาจิกิสถาน
เซนต์เฮเลนา
โปแลนด์
ไทย
เซเนกัล
ฝรั่งเศส
เนปาล
เซาโตเมและปรินซิเป
ฟินแลนด์
บริติชอินเดียนโอเชียนเทร์ริทอรี
เซาท์ซูดาน
มอนเตเนโกร
บรูไน
เซียร์ราลีโอน
มอลโดวา
บังกลาเทศ
แซมเบีย
มอลตา
บาห์เรน
โซมาเลีย
มาซิโดเนียเหนือ
ปากีสถาน
ดินแดนซาฮาราตะวันตก
โมนาโก
ปาเลสไตน์
ตูนิเซีย
ยิบรอลตาร์
พม่า
โตโก
ยูเครน
ฟิลิปปินส์
แทนซาเนีย
เยอรมนี
ภูฏาน
นามิเบีย
รัสเซีย
มองโกเลีย
ไนจีเรีย
โรมาเนีย
มัลดีฟส์
ไนเจอร์
ลักเซมเบิร์ก
มาเก๊า
บอตสวานา
ลัตเวีย
มาเลเซีย
บุรุนดี
ลิกเตนสไตน์
เยเมน
บูร์กินาฟาโซ
ลิทัวเนีย
ลาว
เบนิน
สเปน
เลบานอน
มอริเชียส
สฟาลบาร์และยานไมเอน
เวียดนาม
มอริเตเนีย
สโลวาเกีย
ศรีลังกา
มาดากัสการ์
สโลวีเนีย
สหรัฐอาหรับเอมิเรตส์
มายอต
สวิตเซอร์แลนด์
สิงคโปร์
มาลาวี
สวีเดน
หมู่เกาะโคโคส (หมู่เกาะคีลิง)
มาลี
สหราชอาณาจักร
อัฟกานิสถาน
โมซัมบิก
หมู่เกาะแฟโร
อาเซอร์ไบจาน
โมร็อกโก
หมู่เกาะโอลันด์
อาร์เมเนีย
ยูกันดา
ออสเตรีย
อินเดีย
รวันดา
อันดอร์รา
อินโดนีเซีย
รัฐเอริเทรีย
อิตาลี
อิรัก
เรอูเนียง
เอสโตเนีย
อิสราเอล
ลิเบีย
แอลเบเนีย
อิหร่าน
เลโซโท
ไอซ์แลนด์
อุซเบกิสถาน
ไลบีเรีย
ไอร์แลนด์
โอมาน
สาธารณรัฐอิเควทอเรียลกินี
ฮังการี
ฮ่องกง
สาธารณรัฐแอฟริกากลาง
อียิปต์
เอธิโอเปีย
เอสวาตีนี
แองโกลา
แอฟริกาใต้
แอลจีเรีย

สินค้าใกล้เคียง

Common.Footer.ValueProp.Image.AltText

แอปออกแบบสำหรับ Revit

ดาวน์โหลด Design App.Common.Title

รับพื้นที่เพื่อเข้าถึงวัตถุใหม่ๆ ได้ง่ายขึ้น จัดเก็บ Revit families ของคุณ และทำงานร่วมกับทีมของคุณ

  • เครื่องหมายถูกทำงานโดยตรงกับวัตถุ BIM ข้าง Revit
  • เครื่องหมายถูก พื้นที่จัดเก็บข้อมูลบนคลาวด์ 2GB - จัดเก็บเนื้อหา Revit ของคุณ
  • เครื่องหมายถูก รับ LCA คาร์บอนในตัว (A1-A3) โดยตรงจาก Revit