VORT HRW 30 MONO EVO
Vortice

VORT HRW 30 MONO EVO

Decentralized heat recovery unit. Particularly suitable for installation in residential and commercial premises of new buildings or those subject to renovation for energy efficiency. Ideal, as well as to ensure proper air exchange, also to prevent excess humidity in the room and mold growth on the walls.

Specifikation
  • Shockproof and anti-UV plastic resin structure.
    • Nominal diameter: 100 mm.
    • Ceramic exchanger with hexagonal cells. High heat exchange efficiency (up to 90% at minimum airflow).
    • Wi-Fi module capable of establishing the communication between products through a local “mesh” network, allowing a coordinated functioning and a correct indoor ventilation.
    • High efficiency EC motor fan; five operating speeds, to maximize performance when needed, or to minimize noise and consumption.
    • Integrated relative humidity probe.
    • One-way remote control that allows to set parameters or to view useful product information. In detail:
    • to switch on/off the machine,
    • to select the operating mode (4 different choices),
    • to set fan speed,
    • to select the relative humidity threshold value that activates the Boost speed (three pre-defined levels that can be set at 50%, 65% and 80%),
    • to activate “Night Mode”,
    • to show filter status.
    • Five different operating modes:
    • Continuous ventilation with heat recovery: the product cyclically extracts and introduces air to and from the room, recovering the energy stored in the exchanger;
    • Ventilation with air extraction only: stale air is extracted from the environment;
    • Ventilation with air intake only: the product introduces fresh air into the environment;
    • Automatic ventilation: the heat recovery unit automatically manages the airflows based on the relative humidity sensor readings;
    • “Night” ventilation: when the light in the room goes down, the product automatically forces the fan to run at minimum speed, regardless of the relative humidity values detected.
    • Two air filters, a 65% IsoCoarse and a pre-filter for dust, both easily removable for washing.
    • Mechanical quick closing system of the air delivery integrated into the product chassis.
    • External rubber grille, which can be installed from the outside using plugs or from the inside, through the hole in the wall.
    • Insect mesh, which can be installed into the duct from inside.

Teknisk specifikation
  • Unik ref.12434-12436-12443
  • ProduktfamiljResidential ventilation
  • ProduktgruppHeat recovery units
  • TypMontering (flera objekt)
  • Publiceringsdatum2025-06-26
  • Edition nummer1
Relaterad
  • HuvudmaterialABS
  • Sekundärt materialPolypropen
  • Designad iItalien
  • Tillverkad iItalien
Klassificering
  • BIMobjektkategoriVVS - Värmeåtervinning
  • IFC klassificeringLuft-till-luftvärmeåtervinning

Region tillgänglighet

Asien Europa Oceanien Afrika Sydamerika Nordamerika
Azerbajdzjan
Albanien
Australien
Algeriet
Bolivia
Costa Rica
Bahrain
Belgien
Nya Zeeland
Burkina Faso
Chile
Panama
Filippinerna
Bosnien och Hercegovina
Djibouti
Ecuador
USA
Förenade Arabemiraten
Bulgarien
Egypten
Georgia
Cypern
Etiopien
Hongkong
Danmark
Kamerun
Indien
Estland
Kenya
Indonesien
Finland
Libyen
Iran
Frankrike
Madagaskar
Israel
Grekland
Mauritius
Jordanien
Island
Nigeria
Kazakstan
Italien
Sydafrika
Kina
Kroatien
Tunisien
Kuwait
Litauen
Zambia
Libanon
Malta
Malaysia
Moldavien
Mongoliet
Montenegro
Qatar
Nederländerna
Singapore
Nordmakedonien
Sri Lanka
Norge
Turkiet
Österrike
Turkmenistan
Polen
Vietnam
Portugal
Rumänien
Ryssland
Schweiz
Serbien
Slovakien
Slovenien
Spanien
Storbritannien
Sverige
Tjeckien
Tyskland
Ukraina
Vitryssland