Sheffield Metals

SMI 1.5" Mechanical Seam

Sheffield Metals offers a complete line of engineered and non-engineered standing seam profiles for metal roof and wall systems. Whether your project is residential or commercial, solid substrate or open framing, big or small, we have the resources and products you need for your project. All of our panel profiles are tested to meet minimum UL 90 approvals.

Many of our engineered panel profiles are tested to more stringent requirements, including:

Wind uplift testing
Water penetration testing
Water submersion testing
Air infiltration testing
Impact resistance testing

We specialize in providing painted Galvalume^® and aluminum for the architecturally driven metal panel industry, including:

- More than 50 Sherwin Williams^® colors continuously stocked in Galvalume^®

- Several popular colors in aluminum products in both coil and sheet

- Products meeting LEED requirements

- Color matching for virtually any custom color

- Zinc (elZinc^®), stainless steel, and copper products in both coil and sheet

- 40-year Kynar^® and 40-year silicone-modified polyester (SMP) coating warranties
- 5- to 35-year weathertight warranties- SMI warranty documents are available for viewing online

- Premium metal supplier coast to coast via five regional distribution centers

Specifikation

SMI 1.5" Mechanical Seam Standing Seam Panels over Plywood Roof Deck
1.5" Mechanical Seam Standing Seam Panels with 1½-inch high mechanically seamed ribs for installation over a minimum ½ inch thick plywood roof deck with a minimum slope of 2 inches in 12 inches (2/12). With slopes lower than a 2/12 roof pitch, contact SMI Technical Department for further installation direction and requirements. SMI 1.5” Mechanical Seam Standing Seam Panels are available with Florida State Building Code Product Approval and Texas Department of Insurance certificates. Contact the SMI Technical Department to verify the decking assembly.
SMI 1.5" Mechanical Seam Standing Seam Panels over Steel Deck
1.5" Mechanical Seam Standing Seam Panels with 1½-inch high mechanically seamed ribs for installation over structural steel wide rib (WR, or "B") 22 ga. roof deck with a minimum slope of 2 inches in 12 inches (2/12). With slopes lower than a 2/12 roof pitch, contact SMI Technical Department for further installation direction and requirements. SMI 1.5” Mechanical Seam Standing Seam Panels are available with Florida State Building Code Product Approval and Texas Department of Insurance certificates. Contact SMI Technical Department to verify the decking assembly.
SMI 1.5" Mechanical Seam Standing Seam Panels over Insulated Steel Deck
1.5" Mechanical Seam Standing Seam Panels with 1½-inch high mechanically seamed ribs for installation over rigid board-insulated structural steel wide rib (WR, or "B") 22 ga. roof deck with a minimum slope of 2 inches in 12 inches (2/12). With slopes lower than a 2/12 roof pitch, contact SMI Technical Department for further installation direction and requirements. SMI 1.5” Mechanical Seam Standing Seam Panels are available with Florida State Building Code Product Approval and Texas Department of Insurance certificates. Contact SMI Technical Department to verify the roofing assembly.

Teknisk specifikation

Unik ref.smi15mechanicalseam
ProduktfamiljMetal Roof Panels
ProduktgruppRoof panels concealed fastener
TypObjekt (enstaka objekt)
Publiceringsdatum2024-10-20
Edition nummer1

Länkar

Produkt-urlhttps://sheffieldmetals.com/learning-center/profile/smi-1-5-mechanical-seam/
Produktcertifieringhttps://sheffieldmetals.com/wp-content/uploads/2023/11/1.5MS_Cutsheet_0623.pdf
Teknisk beskrivninghttps://sheffieldmetals.com/wp-content/uploads/2025/04/1-5ms-cutsheet_0425-v2.pdf

Relaterad

HuvudmaterialStål
Sekundärt materialAluminium
Designad iUSA
Tillverkad iUSA

Klassificering

BIMobjektkategoriKonstruktion - Tak
IFC klassificeringTak
ETIM kodEG019610
ETIM namnRoofing materials
Uniclass 2015 kodEF_30_10
Uniclass 2015 beskrivningRoofs
CSI MasterFormat 2014 Kod07 41 13
CSI MasterFormat 2014 TitelMetal Roof Panels
OmniClass nummer23-13 39 27 11 11
OmniClass TitelMetal Roof Panels

Region tillgänglighet

Nordamerika
Amerikanska Jungruöarna
Anguilla
Antigua och Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
British Virgin Islands
Caymanöarna
Costa Rica
Curaçao
Dominica
Dominikanska republiken
El Salvador
Grenada
Grönland
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Kanada
Karibiska Nederländerna
Kuba
Martinique
Mexiko
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Christopher och Nevis
Saint Lucia
Saint Vincent och Grenadinerna
Saint-Barthélemy
Saint-Martin
Saint-Pierre-et-Miquelon
Sint Maarten
Trinidad och Tobago
Turks och Caicos Islands
USA