RO-E - Reverse Osmosis
RO-E - Reverse Osmosis
    Condair

    RO-E - Reverse Osmosis

    Reverse osmosis (RO) is an effective and economic way of removing minerals from water. The Condair RO-E has been developed specifically to provide operational, energy and maintenance benefits to Condair humidifiers.

    By removing the minerals from a humidifier’s supply water, the limescale that builds-up in the system is virtually eliminated. This results in a much lower level of required maintenance in all types of humidifier and reduced energy consumption in steam humidifiers.

    Steam humidifiers that run on mains water need to drain their boiling chambers occasionally to maintain a low mineral content and reduce limescale build-up. By using RO supply water, the steam humidifier’s boiling chamber does not require this regular drain. Therefore it uses less energy to maintain the water’s temperature.

    As the water temperature is consistent, the steam output is also consistent, thus improving humidity control. By using resistive steam humidifiers fed by RO water, ±1%RH control can be achieved.

    Other benefits of using RO water with humidifiers include increasing the life of the evaporative pads in evaporative humidifiers and preventing dust carry-over in spray humidifiers.

    Specifikation
    • Condair RO-E 

      • Voltage: 230V 
      • Frequency: 50 Hz


      Options:

      • All models show the optional housing cover


      Version:

      • Version + is for use with adiabatic humidifiers
      • Models with safety valve are mandatory for CE markets. Note: RO-E 200 and 300 require the safety valve by the external pressure tank. Please consider the instruction in the installation manual! 


      RO-E 40

      Pure water output at 5 °C water temperature against 1 bar: 58 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 98 l/hr


      RO-E+ 40 (for adiabatic humidifiers)

      Pure water output at 5 °C water temperature against 1 bar: 36 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 59 l/hr


      RO-E 100

      Pure water output at 5 °C water temperature against 1 bar: 105 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 181 l/hr


      RO-E+ 100 (for adiabatic humidifiers)

      Pure water output at 5 °C water temperature against 1 bar: 67 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 114 l/hr


      RO-E 200

      Pure water output at 5 °C water temperature against 1 bar: 200 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 352 l/hr


      RO-E+ 200 (for adiabatic humidifiers)

      Pure water output at 5 °C water temperature against 1 bar: 124 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 218 l/hr


      RO-E 300

      Pure water output at 5 °C water temperature against 1 bar: 285 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 513 l/hr


      RO-E+ 300 (for adiabatic humidifiers)

      Pure water output at 5 °C water temperature against 1 bar: 171 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 312 l/hr

    Teknisk specifikation
    • Unik ref.condair-ro-e
    • ProduktfamiljWater Treatment
    • ProduktgruppReverse Osmosis
    • TypObjekt (enstaka objekt)
    • Publiceringsdatum2025-10-02
    • Edition nummer1
    • Höjd (mm)792
    • Bredd (mm)587
    • Djup (mm)484
    Relaterad
    • HuvudmaterialPulverlackerat stål
    • Designad iSchweiz
    • Tillverkad iTyskland
    Klassificering
    • BIMobjektkategoriVVS - Annat
    • IFC klassificeringFilter
    • Uniclass 2015 kodPr_60_55_97_72
    • Uniclass 2015 beskrivningReverse osmosis units
    • OmniClass nummer23-39 41 13 15
    • OmniClass TitelReverse Osmosis and Nanofiltration Membrane Equipment

    Region tillgänglighet

    Sydamerika Europa Oceanien Asien Afrika
    Argentina
    Belgien
    Australien
    Indien
    Sydafrika
    Chile
    Bulgarien
    Nya Zeeland
    Indonesien
    Uruguay
    Danmark
    Israel
    Estland
    Kina
    Finland
    Pakistan
    Frankrike
    Singapore
    Grekland
    Thailand
    Irland
    Turkiet
    Island
    Italien
    Kroatien
    Lettland
    Litauen
    Nederländerna
    Norge
    Österrike
    Polen
    Portugal
    Rumänien
    Schweiz
    Serbien
    Slovakien
    Slovenien
    Spanien
    Storbritannien
    Sverige
    Tjeckien
    Tyskland
    Ukraina
    Ungern
    Common.Footer.ValueProp.Image.AltText

    Design App för Revit

    Ladda familjer direkt till din Revit-modell med ett klick

    Få en plats för att enklare komma åt nya objekt, lagra dina Revit-familjer och samarbeta med ditt team.

    • BockmarkeringArbeta direkt med BIM-objekt bredvid Revit
    • Bockmarkering 2 GB molnlagring - lagra ditt Revit-innehåll
    • Bockmarkering Få inbyggd kol-LCA (A1-A3) direkt från Revit