SMI 2" Mechanical Seam

Sheffield Metals offers a complete line of engineered and non-engineered standing seam profiles for metal roof and wall systems. Whether your project is residential or commercial, solid substrate or open framing, big or small, we have the resources and products you need for your project. All of our panel profiles are tested to meet minimum UL 90 approvals.

Many of our engineered panel profiles are tested to more stringent requirements, including:

Wind uplift testing
Water penetration testing
Water submersion testing
Air infiltration testing
Impact resistance testing

We specialize in providing painted Galvalume^® and aluminum for the architecturally driven metal panel industry, including:

- More than 50 Sherwin Williams^® colors continuously stocked in Galvalume^®

- Several popular colors in aluminum products in both coil and sheet

- Products meeting LEED requirements

- Color matching for virtually any custom color

- Zinc (elZinc^®), stainless steel, and copper products in both coil and sheet

- 40-year Kynar^® and 40-year silicone-modified polyester (SMP) coating warranties
- 5- to 35-year weathertight warranties- SMI warranty documents are available for viewing online

- Premium metal supplier coast to coast via five regional distribution centers

Specifikim

SMI 2.0" Mechanical Seam Standing Seam Panels over Structural Steel Open Framing
Sheffield Metals International (SMI) 2.0" Mechanical Seam Standing Seam Panels with 2-inch high mechanically seamed ribs for installation over open framing with a minimum slope of ½ inch in 12 inches (0.5/12). SMI 2.0” Mechanical Seam Standing Seam Panels in Galvalume are available with Texas Department of Insurance certificates.
Standing Seam Panels over Insulated Steel Deck
Sheffield Metals International (SMI) 2.0" Mechanical Seam Standing Seam Panels with 2-inch high mechanically seamed ribs for installation over insulated structural steel wide rib (WR, or "B") 22 ga. roof deck with a minimum slope of ½ inch in 12 inches (0.5/12) for Galvalume roof systems, minimum slope of 2 inch in 12 inches (2/12) for aluminum roof systems. SMI 2.0” Mechanical Seam Standing Seam Panels are available with Florida State Building Code Product Approval and Texas Department of Insurance certificates. Contact SMI Technical Department to verify decking assembly.
SMI 2.0" Mechanical Seam Standing Seam Panels over Steel Roof Deck
Sheffield Metals International (SMI) 2.0" Mechanical Seam Standing Seam Panels with 2-inch high mechanically seamed ribs for installation over structural steel wide rib (WR, or "B") 22 ga. roof deck with a minimum slope of ½ inch in 12 inches (0.5/12) for Galvalume roof systems, minimum slope of 2 inch in 12 inches (2/12) for Aluminum roof systems. SMI 2.0” Mechanical Seam Standing Seam Panels are available with Florida State Building Code Product Approval and Texas Department of Insurance certificates. Contact SMI Technical Department to verify the decking assembly.
SMI 2.0" Mechanical Seam Standing Seam Panels over Plywood Deck
Sheffield Metals International (SMI) 2.0" Mechanical Seam Standing Seam Panels with 2-inch high mechanically seamed ribs for installation over plywood roof deck with a minimum slope of ½ inch in 12 inches (0.5/12) for Galvalume roof systems; minimum slope of 2 inch in 12 inches (2/12) for Aluminum roof systems. SMI 2.0” Mechanical Seam Standing Seam Panels are available with Florida State Building Code Product Approval and Texas Department of Insurance certificates.

Specifikime teknike

Referencë unikesmi2mechanicalseam
Familja e produkteveMetal Roof Panels
Grupi i produkteveRoof panels concealed fastener
LlojiObjekt (një objekt të vetëm)
Data e botimit2024-10-20
Numri i botimit1

Lidhje

Product URLhttps://sheffieldmetals.com/learning-center/profile/smi-2-0-mechanical-seam/
Certifikimet e produktevehttps://sheffieldmetals.com/wp-content/uploads/2023/11/2.0MS_Cutsheet_0623.pdf
Përshkrimet teknikehttps://sheffieldmetals.com/wp-content/uploads/2025/04/2-0ms-cutsheet_0425-v2.pdf

Të ngjashme

Materiali kryesorÇelik
Materiali dytësorAlumin
Projektuar nëShtetet e Bashkuara
Prodhuar nëShtetet e Bashkuara

Klasifikimi

Kategoria BIMobjectNdërtim - Çatitë
IFC classificationKulmet
Kodi ETIMEG019610
Emri ETIMRoofing materials
Uniclass 2015 CodeEF_30_10
Uniclass 2015 PërshkrimRoofs
CSI MasterFormat 2014 Code07 41 13
CSI MasterFormat 2014 TitleMetal Roof Panels
OmniClass Number23-13 39 27 11 11
OmniClass TitleMetal Roof Panels

Rajoni i disponueshëm

North America
Anguilla
Antigua dhe Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Dominica
El Salvador
Grenada
Grenlandë
Guadeloupe
Guatemala
Haiti
Honduras
Ishujt e Virgjër Britanikë
Ishujt e Virgjër të SHBA
Ishujt Kajman
Kanadë
Karaibe Holandë
Kolektiviteti i Shën Martinit
Kosta Rika
Kubë
Kuraçao
Martinique
Meksikë
Montserrat
Nikaragua
Panama
Porto Riko
Republika Domenikane
Saint-Barthélemy
Shën Kitts dhe Nevis
Shën Lucia
Shën Pierre dhe Miquelon
Shën Vincent dhe Grenadinet
Shtetet e Bashkuara
Sint Maarten
Trinidad dhe Tobago
Turks dhe Caicos Islands
Xhamaika