Sit stand table se:lab tableboard

Mobile, convertible table

Product features

The table must be available in:

• W 1400 x D 700 x H 715 – 1345 mm
• W 1600 x D 800 x H 715 – 1345 mm
• W 1800 x D 900 x H 715 – 1345 mm

Construction

It must be a motorised height-adjustable table on castors, operated with a rechargeable battery. The battery must be able to move the table approx. 50 times and must then be recharged. The table must be height-adjustable between 715 mm to 1345 mm. The table top must be equipped with a writable 19-mm whiteboard surface which must be able to be released with both hands and tilted to a vertical position. In one product, the table must be a mobile meeting table and a writable wall. The table must be equipped with two lockable castors with a diameter of 65 mm.

Frame system

The frame must be based on a beam solution consisting of a central or double support beam and desktop supports. The supporting frame must always to be adapted perfectly to the shape of the table top. The table top supports must ensure a high level of stability.

Leg frame

The tables must have a control column with one gear per leg frame. The motors must be mounted in a steel housing at the upper end of the control columns to provide optimum transmission of force. The smooth sliding guide must ensure that the double telescope runs safely and guarantees a high level of stability.

Model features

Desks with motorised height adjustment enable the user to change their position at the desk at the push of a button, which is ideal for people with health problems or to prevent the same.

Desks with motorised height adjustment must be notable for the following characteristics:

• very good control

• very long-lasting

• sliding guide for high load-bearing capacity

• motors running simultaneously due to synchronous control

• Soft-Start-Stop for smooth height adjustment

• collision protection

• sensor disconnection

• being very quiet

• adjustment range with 630 mm stroke as per DIN EN 527-1

The speed of adjustment must be approx. 35 mm/sec in neutral. The effective load capacity should be up to 50 kg depending on the desk size. In order to prevent injuries from crushing or abrasion, a minimum gap of 25 mm should be left between adjoining surfaces.

The height adjustment must be operated by means of a user-friendly up-down control attached at the edge of the desktop on the right-hand (or left-hand side). The hand switch must have intuitive operability.

Das table must come with a gyro sensor as standard. The gyro sensor must react to the tilting of the desktop and assess this as a collision. Traversing movement must be stopped immediately if the desktop is tilted and enabled again by the minimal countermovement of a possible obstacle.

Packaging:

The packaging must be done on disposable pallets. Items must be supplied in sections for on-site final assembly in order to keep the transport volume as small as possible.

Quality and ecology:

The table must be designed to meet the following requirements:

• GS label of TÜV Rheinland LGA Products GmbH(in preparation)
• EK5/AK3 13-01:2018
• DIN EN 14434:2010-04
• EK5/AK3 15-01:2017
• EK5/13-11
• EK5/AK3 13-03:2014
• PEFC certification for wood components
• Life cycle assessment in accordance with DIN EN 15804
• AGR certificate
• Greenguard

The product manufacturing processes are to be certified to the following standards:

• DIN ISO 14001 Environmental management
• DIN ISO 50001 Energy management
• DIN ISO 9001 Quality management
• DIN ISO 45001 Health and Safety Management