Rockfon

Rockfon® CleanSpace™ Block

Rockfon CleanSpace Block is specifically designed for use in high-risk, air pressure controlled environments such as cleanrooms and laboratories where there are demanding sanitation requirements

Very low particle emission: ISO Class 2
Resistance to stringent detergents and disinfectants, resulting in ‘Excellent’ chemical resistance classification
Does not contribute to the growth of microorganisms

Specifikim

Sound Absorption	αw: 0.90 (Class A)
Reaction to Fire	B-s1,d0
Light Reflection	74%
Humidity and Sag Resistance	Up to 100% RH. No visible deflection in high humidity.
Surface Durability	The high-performance inert film of Rockfon CleanSpace Block provides enhanced durability and water-repellence. The film contains DMAc (CAS 127-19-5) in a concentration ≥ 0.1% and < 1% by weight.
Cleaning	• Vacuum • Damp cloth • Steam cleaning (twice a year) • Low-pressure foam cleaning (12×/year) • High pressure cleaning (monthly and only applicable for A-edge installation). Max. 80 bar, min. 1 meter distance, water spread at 30° angle, max. water flow 360 L/h. Tiles must be clipped into the grid. Chemical resistance: Tested according to ISO 2812-1 (“Determination of resistance to liquids - Part 1: Immersion in liquids other than water”) and classification in accordance with VDI 2083 Part 17. Results are classified as ‘Excellent’ with the following detergents and disinfectants (daily disinfection): – Formalin (37%) – Ammonia (25%) – Hydrogen peroxide (30%) – Sulphuric acid (5%) – Phosphoric acid (30%) – Peracetic acid (15%) – Hydrochloric acid (5%) – Isopropanol (100%) – Sodium hydroxide (5%) – Sodium hypochlorite (15%) Use only soft equipment directly on the tile surface: cloth or sponge. Avoid scraping or stiff brush rubbing.
Disinfection	• Resistant to Hydrogen Peroxide Vapor (no impact on aeration time) • Withstands UVC and Ozone disinfection without degradation
Clean Room Classification	ISO Class 2
Air Pressure	Suitable for areas requiring differential pressure. When used in combination with: -HDC 2 for the 25 mm tile; the air leakage rate of less than 0.5m³/h/ m²/Pa under a pressure range of 5 to 40 Pa is achieved. The amount of hold down clips (HDC) depends on the tile dimensions and the room size/shape. For more information please contact customer service.

Specifikime teknike

Referencë unikerockfon-cleanspace-block
Familja e produkteveSuspended Ceilings
Grupi i produkteveHygienic
LlojiMaterial për ndërtim
Data e botimit2022-03-30
Numri i botimit1

Lidhje

Product URLhttps://rockfon.link/product-rockfon-cleanspace-block
Udhezime instalimihttps://rockfon.link/cleanspace-block-installation
Përshkrimet teknikehttps://rockfon.link/cleanspace-block-datasheet

Të ngjashme

Materiali kryesorStone Wool
Projektuar nëDanimarkë

Klasifikimi

Kategoria BIMobjectMateriale ndërtimi - Panele dhe aksesorë akustikë
IFC classificationTavan
Emrin UNSPSCAcoustic ceiling tiles
UNSPSC code30161601
Uniclass 2015 CodeSs_30_25_22
Uniclass 2015 PërshkrimDemountable suspended ceiling systems
CSI MasterFormat 2014 Code09 51 00
CSI MasterFormat 2014 TitleAcoustical Ceilings
OmniClass Number23-15 13 21
OmniClass TitleCeiling Panels

Rajoni i disponueshëm

Europe
Åland Islands
Andorra
Austri
Belgjikë
Bjellorusi
Bosnjë dhe Hercegovinë
Bulgari
Danimarkë
Estoni
Finlandë
Francë
Gërnzi
Gjermani
Gjibraltar
Greqi
Holandë
Hungari
Irlandë
Ishujt Faroe
Ishulli i Njeriut
Islandë
Itali
Jersey
Kroacia
Letoni
Liechtenstein
Lituani
Luksemburg
Mali i Zi
Maltë
Maqedonia e Veriut
Mbretëria e Bashkuar
Moldovë
Monaco
Norvegji
Poloni
Portugali
Qipro
Qyteti i Vatikanit
Republika Çeke
Rumani
San Marino
Serbia
Shqipëri
Sllovenia
Slovakia
Spanjë
Suedi
Svalbard dhe Jan Mayen
Switzerland
Ukrainë