XTherm Condensing Pool Heaters 1005A-2005A
Raypak

XTherm Condensing Pool Heaters 1005A-2005A

Raypak’s XTherm product packs everything you need into one cabinet – a vertical heat exchanger, ultra-high efficiency (up to 97%), a heater pumping package, easy-to-understand diagnostics, low emissions, even a built-in multi-unit controller. The result is a pool heater that is practically plug-and-play.

Features:

  • 97% Thermal Efficiency at Full Rate.
  • Positive vent pressure, Condensing Appliance.  Cat IV Vent Required.
  • Bronze Headers with Cupro-Nickel Finned-Tube Primary Heat Exchanger. 316L Stainless Steel Condensing Heat Exchanger. ASME Section IV constructed and stamped, National Board registered.
  • CSA Low-Lead certified, less than 0.25% Lead.
  • Certified to ANSI Z21.56.
  • Minimum Continuous Inlet Water Temperature: 50°F.
  • Maximum Setpoint: 106°F.
  • On/Off Operation with Soft Start.
  • VERSA IC® Control Package with LCD Display.
  • Status Display Lights.
  • Cascade control of up to 8 units, no external sequencer required.
  • Diagnostics Center with History, English, no codes.
  • Modbus RTU BMS port (RS485).
  • 0-10 VDC BMS Interface (Setpoint or Direct Drive).
  • All models indoor/outdoor construction.
  • Certified under SCAQMD Rule 1146.2.  Meets all Low NOx regulations.
  • Engineered with precisely matched system components.
  • Smallest installed footprint (under 11 square feet) design fits tight spaces and easily replaces larger boilers.
  • 100% Factory Fire Tested.
  • Complete cabinet protects all controls and wiring. Tough, rust-resistant powder-coat finish.
  • Suitable for altitudes up to 10,000 ft. (derate above 5,000 ft.).
  • Available for natural gas or propane.
  • Integral Combustion Air Filter (MERV8).
  • Multiple Pump Outputs – Heater Pump, System Pump.
  • Whisper-Quiet Operation.
  • Proudly Assembled in the USA.

Options:

  • BACNet IP, BACnet MS/TP, Modbus TCP, N2 Metasys (B-85)
  • Lonworks (B-86)
  • PVC Vent – Factory-Installed ONLY (D-32)
  • Centrotherm® Polypropylene Vent Adapter (D-33)
  • Alarm with 4” Bell (E-5)
  • Low Water Cutoff (F-10)
  • Condensate Neutralizer (Z-12)
Specifikim
    • 97% thermal efficiency at full rate 
    • 100% factory fire-tested 
    • VERSA IC® integrated controller with 7" color touchscreen display 
    • Raymote™ remote connectivity provided standard 
    • Full safety diagnostics with history 
    • Status display lights 
    • Cascade up to 8 heaters – no external sequencer required 
    • Maximum outlet water temperature setpoint: 104°F (40°C) 
    • Minimum acceptable inlet water temperature: 50°F (10°C) 
    • Limited 25-year thermal shock warranty 
    • Limited 5-year primary heat exchanger warranty 
    • Limited 10-year secondary heat exchanger warranty 
    • Maximum Pool Setpoint 106°F (41°C) (104°F [40°C] default)
    • On/Off operation 
    • SCAQMD Rule 1146.2 certified, Low NOx < 20 ppm 
    • Primary/secondary piping mandatory for proper operation 
    • Proudly assembled in the USA
Specifikime teknike
  • Referencë unikeXTherm-Condensing-Pool-Heaters-1005A-2005A
  • Familja e produktevePool & Spa Products
  • Grupi i produkteveCommercial Pool Heaters
  • LlojiObjekt (një objekt të vetëm)
  • Data e botimit2020-10-01
  • Numri i botimit1
Të ngjashme
  • Projektuar nëShtetet e Bashkuara
  • Prodhuar nëShtetet e Bashkuara
Klasifikimi
  • Kategoria BIMobjectNgrohes, ventilimit dhe ajrit të kondicionuar - Ngrohës uji
  • IFC classificationShkëmbyesi i nxehtësisë
  • Emrin UNSPSCDomestic water heaters
  • UNSPSC code40101825
  • Uniclass 2015 CodePr_60_60_96
  • Uniclass 2015 PërshkrimWater heaters
  • CSI MasterFormat 2014 Code23 00 00
  • CSI MasterFormat 2014 TitleHeating, Ventilating, and Air Conditioning (HVAC)
  • OmniClass Number23-33 00 00
  • OmniClass TitleHVAC Specific Products and Equipment
  • CSI UniFormat II CodeD3090
  • CSI UniFormat II TitleOther HVAC Systems & Equipment

Rajoni i disponueshëm

North America
Kanadë
Shtetet e Bashkuara
Common.Footer.ValueProp.Image.AltText

Aplikacion dizajnimi për Revit

Ngarkoni familjet direkt në modelin tuaj Revit me një klik të vetëm

Merrni një vend për të hyrë më lehtë në objekte të reja, ruani familjet tuaja Revit dhe bashkëpunoni me ekipin tuaj.

  • Shenjë টিকPunoni drejtpërdrejt me objekte BIM pranë Revit
  • Shenjë টিক 2 GB hapësirë ruajtje në Cloud - ruani përmbajtjen tuaj Revit
  • Shenjë টিক Merrni LCA e karbonit të mishëruar (A1-A3) direkt nga Revit