Objektet BIM - Shkarkim falas Ravaproof Stoperproof H

Ravaproof Stoperproof H

A safe and practical new generation waterproofing membrane system designed for Single Layer Horizontal Waterproofing Applications at below grade and tanking works.

Single layer
No need for protection concrete
Free laying
Easy and fast one-time application
Saving time, cost and labor

Ultra flexible, elastomeric special formulation provides excellent and continuous bonding to freshly poured concrete. Its high-strength felt provides superior resistance to hydrostatic pressure, penetrating elements and heavy storage materials. STOPERproof eliminates the need for protection concrete.

FEATURES

Bitumen structure: High performance elastomeric membrane designed with a special formulation of bitumen modified with a high percentage of SBS and specific thermoplastic polymers.

Reinforcement for RAVAPROOF STOPERPROOF H 4,5MM DR: Ultra strong double reinforcement system consisting of a special polyester with a high-strength nonwoven polyester felt.

Reinforcement for RAVAPROOF STOPERPROOF H 4,5MM : High strength polyester carrier.

Reinforcement for RAVAPROOF STOPERPROOF H 3,5MM : High strength polyester carrier.

Top Surface: Special sand

Bottom Surface: PE film

Overlap allowance: 5cm self-adhesive + 5cm PE film

ADVANTAGES

Due to the hydration heat generated during the curing of freshly poured concrete, its special formulation provides continuous, homogeneous and perfect bonding. It prevents air and water penetration.
Any possible small leakage is blocked at the exact point and thus easy to correct by grouting.
Superior resistance to hydrostatic pressure, tearing and impact.
Superior resistance to penetrating elements, pedestrian traffic and heavy storage materials on the construction site.
Together with the special formulation of the membrane, fine sand creates a protection layer. By this way, STOPERproof to work directly on the waterproofing system without requiring a protection concrete.
As the concrete begins to cure, the hydration heat slightly softens the fine sandy surface, allowing the membrane to bond perfectly to the concrete.
The membrane is free-laid on compacted soil or grout.
Self-adhesive and notorch-applied overlaps

Specifikim

Thickness RAVAPROOF STOPERPROOF H 4,5MM DR: 4,5 mm(±0,2)
Thickness RAVAPROOF STOPERPROOF H 4,5MM: 4,5 mm(±0,2)
Thickness RAVAPROOF STOPERPROOF H 3,5MM: 3,5 mm(±0,2)
Please review the uploaded tds and brochures for product specifications RAVAPROOF STOPERPROOF H 4,5MM and RAVAPROOF STOPERPROOF H 3,5MM
SPECIFICATION FOR RAVAPROOF STOPERPROOF H 4,5MM DR:
Mass per unit area: max 5.2 kg/m2
Length: 8 m
Width: 100 cm
Deviation from linearity : Pass
Waterproof: 10kPa/60kPa
Flexibility in cold :≤ -20 °C
Tensile properties (Length/Width): 1100/900 N/50mm
Elongation at break (Length/Width) : ± 45/50 %
Impact resistance : 1500 mm
Resistance to static loads : min 25kg
Tear resistance (with nails)(Length/Width) : 300/300 N
Joint sheer resistance : ≥ 1100 N/50 mm
Hydrostatic Pressure ASTM D5385 : ≥ 70 (100) m (psi)
Lateral Water Migration ASTM D5385 : ≥ 70 (100) m (psi)
Stripping from the concrete to which ASTM D903 : 4850 N/m
it adheres Adhesion to the poured concrete EN 1372 : 3,70 N/mm
Peel resistance of joints EN 12316-1: 250 N/50mm