119 gallon storage tank
119 gallon storage tank

    119 gallon storage tank

    Residential / commercial glass-lined 119G storage tank

    Specifikim
    • Construction
      The tank shall be manufactured from mild steel with
      a baked on Cobalt enriched porcelain glass lining
      Tank outer shell shall be steel with a baked on
      powder coating for protection
      The ECO-119GLBB Tank is only certified for Indoor
      installation, it should not be located external to the building
      Insulation
      2" of High R value foam insulation will be sprayed on to the
      bare shell of the tank to reduce heat loss
      Connections
      Connections to the Hot and Cold building supplies shall be
      1 1/2" NPT Female type
      Connections to the Hot and Cold piping to the Heat Pump
      shall be 3/4" NPT Female type
      Cold Water Piping from Storage Tank to Heat Pump
      and return of Hot Water piping from Heat Pump to Tank
      shall be 1/2" Copper or PEX.
      2 of 4" long 3/4" Male x 3/4" Male connections will be boxed
      which shall be located at the base of the ECO-119GLBB
      2 x Magnesium anode rods shall be installed internally
      Controls
      The tank shall be supplied with a Temperature sensor
      installed in a sensor well to control the GS5-45HPC & -D
      Additional GS Heat Pumps connected to a tank shall
      require an individual Temperature sensor
      Tank Sensor wiring to the GS Heat Pump will be 18-2AWG
      Two additional Thermowells are supplied with the Tank at
      the Top and Bottom levels of the Tank so that a Controller
      to provide Demand Response signals can be used
      Pressure and Temperature Relief
      Tank shall be supplied with a factory installed
      ASME certified Pressure and Temperature Relief valve
      Settings shall be at 150 Psig for Presssure and
      210°F for Temperature


    Specifikime teknike
    • Referencë unike119-gallon-storage-tank
    • Familja e produkteveResidential Tanks
    • Grupi i produkteveECO-119GLBB
    • LlojiObjekt (një objekt të vetëm)
    • Data e botimit2025-09-05
    • Numri i botimit1
    • Gjatësia (inçet)63.57
    • Gjerësia (inçet)28
    • Thellësisë (inçet)28
    Të ngjashme
    • Materiali kryesorCarbon Steel
    • Materiali dytësorGlass granulate
    • Projektuar nëShtetet e Bashkuara
    • Prodhuar nëShtetet e Bashkuara
    • Pesha Net (Lbs)345
    Klasifikimi
    • Kategoria BIMobjectNgrohes, ventilimit dhe ajrit të kondicionuar - Ngrohës uji
    • IFC classificationNgrohëse elektrike
    • Kodi ETIMEG000043
    • Emri ETIMResidential heating
    • Uniclass 2015 CodePr_60_60_96
    • Uniclass 2015 PërshkrimWater heaters
    • CSI MasterFormat 2014 Code22 33 36.16
    • CSI MasterFormat 2014 TitleCommercial Storage Electric Domestic Water Heaters
    • OmniClass Number23-31 29 00
    • OmniClass TitleHot Water Heaters

    Rajoni i disponueshëm

    North America
    Anguilla
    Antigua dhe Barbuda
    Aruba
    Bahamas
    Barbados
    Belize
    Bermuda
    Dominica
    El Salvador
    Grenada
    Grenlandë
    Guadeloupe
    Guatemala
    Haiti
    Honduras
    Ishujt e Virgjër Britanikë
    Ishujt e Virgjër të SHBA
    Ishujt Kajman
    Kanadë
    Karaibe Holandë
    Kolektiviteti i Shën Martinit
    Kosta Rika
    Kubë
    Kuraçao
    Martinique
    Meksikë
    Montserrat
    Nikaragua
    Panama
    Porto Riko
    Republika Domenikane
    Saint-Barthélemy
    Shën Kitts dhe Nevis
    Shën Lucia
    Shën Pierre dhe Miquelon
    Shën Vincent dhe Grenadinet
    Shtetet e Bashkuara
    Sint Maarten
    Trinidad dhe Tobago
    Turks dhe Caicos Islands
    Xhamaika
    Common.Footer.ValueProp.Image.AltText

    Aplikacion dizajnimi për Revit

    Ngarkoni familjet direkt në modelin tuaj Revit me një klik të vetëm

    Merrni një vend për të hyrë më lehtë në objekte të reja, ruani familjet tuaja Revit dhe bashkëpunoni me ekipin tuaj.

    • Shenjë টিকPunoni drejtpërdrejt me objekte BIM pranë Revit
    • Shenjë টিক 2 GB hapësirë ruajtje në Cloud - ruani përmbajtjen tuaj Revit
    • Shenjë টিক Merrni LCA e karbonit të mishëruar (A1-A3) direkt nga Revit