Modular Side/Down Discharge Direct Fired Heater Packaged Unit with Cooling Coil

For Direct Fired Make-Up Air Packaged Unit (MPU) Submittal Drawings please click here.
For Direct Fired Make-Up Air Packaged Unit (MPU) Spec Sheets please click here.
For Direct Fired Make-Up Air Packaged Unit (MPU) Performance Data please click here.

The Modular Packaged Unit (MPU) is designed to be a factory packaged air conditioning and heating unit for 100% Outdoor Air (OA) applications. Units are sized to operate between 360 to 600 cfm/ton of cooling, depending on climate.

STANDARD FEATURES & BENEFITS

High Efficiency Nominal 14 SEER Rating Condensers

Integral Cooling Staged Thermostat

Multiple Stage cooling for lower energy usage

Pre-Piped and Charged Refrigeration Circuits

Optimized for 100% OA for kitchen use

Cooling requires no additional roof footprint

Coils and Condensers sized to comfort cool make-up air

R-410A Environmentally Friendly Refrigerant

Thermal Expansion Valves and Filter/Dryer Kits

External Equalization Lines for Thermal Expansion Valves

Hard Start Relay Kits on the Condensers

Condenser Disconnect Switch

Vacuum Tested and Leak Checked Lineset/Coils

Condenser Transformer Prewired

Thermostat Prewired and Interlocked with Heater

Integral Weather/Hail Guards

Optimized for high efficiency...The modular packaged cooling unit is optimized to work in conjunction with highly efficient make-up air delivery methods, such as perimeter supply plenums. The unit can either have a down or end discharge, and can be used with both electric and gas heat. All refrigerant is environmentally friendly R-410A and condensers have a nominal SEER rating of 14 for greater efficiency.
One benefit of this unit is the multiple cooling stages. Multiple cooling stages increase the efficiency by not using 100% of the cooling capacity when this is not needed, thus allowing lower energy usage. An internal make-up air cooling thermostat automatically energizes the first stage when cooling of the make-up air is required. The same thermostat has a built in adjustable differential to energize the second stage of cooling when required.
The condensers are top mounted on the make-up air unit to minimize roof space requirements, and are situated for optimal airflow and serviceability.

CERTIFICATIONS
This product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S. and Canadian products safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued performance.

Specifikime teknike

Referencë unikecaptiveaire-033
Familja e produkteveHVAC
Grupi i produkteveModular Rooftop Air Handling Units
LlojiObjekt (një objekt të vetëm)
Data e botimit2012-01-30
Numri i botimit1

Lidhje

Product URLhttp://www.captiveaire.com/CatalogContent/Fans/Sup_MPU/index.asp

Të ngjashme

Projektuar nëShtetet e Bashkuara
Prodhuar nëShtetet e Bashkuara

Klasifikimi

Kategoria BIMobjectNgrohes, ventilimit dhe ajrit të kondicionuar - Kondicioner
Uniclass 2015 CodeSs_65_40_33_51
Uniclass 2015 PërshkrimMechanical supply ventilation systems
CSI MasterFormat 2014 Code23 00 00
CSI MasterFormat 2014 TitleHeating, Ventilating, and Air Conditioning (HVAC)
OmniClass Number23-33 00 00
OmniClass TitleHVAC Specific Products and Equipment
CSI UniFormat II CodeD30
CSI UniFormat II TitleHVAC

Rajoni i disponueshëm

North America
Anguilla
Antigua dhe Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Dominica
El Salvador
Grenada
Grenlandë
Guadeloupe
Guatemala
Haiti
Honduras
Ishujt e Virgjër Britanikë
Ishujt e Virgjër të SHBA
Ishujt Kajman
Kanadë
Karaibe Holandë
Kolektiviteti i Shën Martinit
Kosta Rika
Kubë
Kuraçao
Martinique
Meksikë
Montserrat
Nikaragua
Panama
Porto Riko
Republika Domenikane
Saint-Barthélemy
Shën Kitts dhe Nevis
Shën Lucia
Shën Pierre dhe Miquelon
Shën Vincent dhe Grenadinet
Shtetet e Bashkuara
Sint Maarten
Trinidad dhe Tobago
Turks dhe Caicos Islands
Xhamaika