ARDEX V 1200™ Self-leveling Underlayment​​​​​​​​​​​

Choose The Workhorse

ARDEX V 1200™ is the trusted leveler for big jobs on tight schedules.

Install over: interior concrete, terrazzo, ceramic and quarry tile, epoxy coating systems and non-water soluble adhesive residues on concrete.

Key Features

• Pour with ROVER^® Rolling Barrel Cart
• Pump with AMP^® Automatic Mixing Pump
• Interior use on, above or below grade
• Mixes with water

Installation

• General priming recommendations:
• Concrete: ARDEX P 51TM Primer
• Most non-porous substrates, epoxy coatings,adhesive residue: ARDEX P 82TM Ultra Prime
• Packaging: 50 lb. (22.7 kg)
• Coverage: 25 sq. ft. per bag at 1/4” (2.3 m2 at 6 mm)
• Thickness:
• Levels at 1/4” (6 mm)
• Installs from 1/8” to 1 1/4” (3 mm to 3 cm)
• Can be tapered
• Flow time: 10 minutes
• Walkable: 2 to 3 hours
• Install floor coverings:
• For installations up to 3/8” (0.95 cm):
• Moisture-insensitive tile (ceramic, quarry, porcelain): 6 hours
• Porous-backed carpet: 12 hours
• Non-porous backed carpet, vinyl sheet/tile/plank, rubber, linoleum: 24 hours
• For installations more than 3/8” (0.95 cm):
• Moisture-insensitive tile (ceramic, quarry, porcelain): 6 hours
• Porous-backed carpet: Mat test
• Non-porous backed carpet, vinyl sheet/tile/plank, rubber, linoleum: Mat test
• All other coverings: Mat test

Performance

• ASTM C191 Initial Set: Approx. 30 minutes
• ASTM C191 Final Set: Approx. 90 minutes
• ASTM C109 mod (air cure only) Compressive Strength: 4500 psi (316 kg/cm2) at 28 days
• ASTM C348 Flexural Strength: 1000 psi (70 kg/cm2) at 28 days
• VOC: 0