ARDEX TWP Tilt Wall Patch and Finishing Compound
ARDEX TWP Tilt Wall Patch and Finishing Compound
    ARDEX

    ARDEX TWP Tilt Wall Patch and Finishing Compound

    ARDEX TWP™ is a trowelable Portland cement-based finishing compound used to fill and smooth interior and exterior vertical concrete surfaces such as tilt-up walls, pre-cast or poured in place concrete panels, and other concrete or masonry surfaces prior to sealing or painting.
    Key Features

    • Use for filling and smoothing interior and exterior vertical concrete or masonry surfaces
    • Portland cement-based
    • Easy to mix and apply
    • Hardens quickly without shrinking
    Specifikim
    • Installation Mixing Ratio: 2 1/2 quarts of water per 10 lb. bag. For smaller batches, use 2 parts powder to 1 part water by volume Material Requirements on Smooth Substrate (approx.): 100 to 150 sq. ft. per bag at a skim coat 33.3 sq. ft. per bag at 1/8” 16.6 sq. ft. per bag at 1/4” Pot Life: 15 to 20 minutes Time to Paint or Seal: 15 to 60 minutes, depending on jobsite conditions VOC: 0 Packaging: 10 lb./4.5 kg net weight Storage: Store in a cool dry area. Do not leave bags exposed to sun. Protect unused material by removing air from bag and sealing tightly. Shelf Life: Nine months unopened. Warranty: ARDEX L.P. Standard Limited Warranty applies.
    Specifikime teknike
    • Referencë unikeARDEX-TWP
    • Familja e produkteveConcrete Repair
    • Grupi i produkteveTilt Wall Patch and Finishing Compound
    • LlojiObjekt (një objekt të vetëm)
    • Data e botimit2019-11-07
    • Numri i botimit1
    Të ngjashme
    • Materiali kryesorCementitious
    • Projektuar nëShtetet e Bashkuara
    • Prodhuar nëShtetet e Bashkuara
    Klasifikimi
    • Kategoria BIMobjectMateriale ndërtimi - Beton
    • IFC classificationMur
    • Emrin UNSPSCWall finishing materials
    • UNSPSC code301615
    • CSI MasterFormat 2014 Code09 70 00
    • CSI MasterFormat 2014 TitleWall Finishes
    • OmniClass Number23-15 00 00
    • OmniClass TitleInterior and Finish Products
    • CSI UniFormat II CodeC3010
    • CSI UniFormat II TitleWall Finishes

    Rajoni i disponueshëm

    North America
    Anguilla
    Antigua dhe Barbuda
    Aruba
    Bahamas
    Barbados
    Belize
    Bermuda
    Dominica
    El Salvador
    Grenada
    Grenlandë
    Guadeloupe
    Guatemala
    Haiti
    Honduras
    Ishujt e Virgjër Britanikë
    Ishujt e Virgjër të SHBA
    Ishujt Kajman
    Kanadë
    Karaibe Holandë
    Kolektiviteti i Shën Martinit
    Kosta Rika
    Kubë
    Kuraçao
    Martinique
    Meksikë
    Montserrat
    Nikaragua
    Panama
    Porto Riko
    Republika Domenikane
    Saint-Barthélemy
    Shën Kitts dhe Nevis
    Shën Lucia
    Shën Pierre dhe Miquelon
    Shën Vincent dhe Grenadinet
    Shtetet e Bashkuara
    Sint Maarten
    Trinidad dhe Tobago
    Turks dhe Caicos Islands
    Xhamaika
    Common.Footer.ValueProp.Image.AltText

    Aplikacion dizajnimi për Revit

    Ngarkoni familjet direkt në modelin tuaj Revit me një klik të vetëm

    Merrni një vend për të hyrë më lehtë në objekte të reja, ruani familjet tuaja Revit dhe bashkëpunoni me ekipin tuaj.

    • Shenjë টিকPunoni drejtpërdrejt me objekte BIM pranë Revit
    • Shenjë টিক 2 GB hapësirë ruajtje në Cloud - ruani përmbajtjen tuaj Revit
    • Shenjë টিক Merrni LCA e karbonit të mishëruar (A1-A3) direkt nga Revit