Опубликуйте свои продукты
Nuheat Mesh Electric Floor Heating System 240V
Nuheat

Nuheat Mesh Electric Floor Heating System 240V

Mesh is an on-site adjustable "strip and roll" solution.

Mesh is best suited for square and rectangular shaped areas where some on-site flexibility is needed. The heating wire is attached to a roll of adhesive mesh material. During installation, the “roll” can be cut, turned, and adhered to the subfloor to provide floor heat in the desired areas of the room. Mesh kits comes in 32 sizes. Choose the mesh kit that is best suited for the size of the room/area and configure on-site to provide floor heat in the desired areas of the room.

As Featured on Amazon.com

Cпецификация
  • Technical Info:

    Material: Two single conductor Tefzel-coated resistance wires covered by a tin-plated copper braid and then coated with a durable copolymer (PVC) outer jacket. Heating cable is attached to a self-adhesive fiberglass mesh material.

    Operating Voltage: 240 V.

    Power Output: 12 watts per square foot.

    Maximum Continuous Exposure Temperature: 194°F (90°C). 

    Heating Cable: 2-wire, grounded, twisted pair with PVC outer jacket.

    Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length.

Техническая спецификация
  • Уникальная ссылкаNuheat-Mesh-Electric-Floor-Heating-System-240V
  • Тип продукцииRadiant Heat
  • Группа продукцииMesh
  • ТипДокументация (для ознакомления)
  • Дата публикации2019-02-27
  • Номер версии1
Связанные
  • Разработано вСоединенные Штаты Америки
Классификация
  • Категория BIMobjectНапольная плитка - Нижний слой/основание
  • Название по ССКПУ ООНHeating equipment and parts and accessories
  • Код ССКПУ ООН401018
  • Код CSI MasterFormat 201423 83 00
  • Заголовок CSI MasterFormat 2014Radiant Heating Units
  • Номер OmniClass23-33 15 15
  • Наименование OmniClassSpecialized Surface Heating Products

Доступно в регионах:

Северная Америка
Соединенные Штаты Америки
Common.Footer.ValueProp.Image.AltText

Design App для Revit

Загружайте семейства прямо в модель Revit одним щелчком мыши

Получите место для более легкого доступа к новым объектам, хранения семейств Revit и совместной работы с вашей командой.

  • ГалочкаРаботайте напрямую с BIM-объектами рядом с Revit
  • Галочка 2 ГБ в облачном хранилище — храните свой контент Revit
  • Галочка Получите оценку жизненного цикла (A1–A3) воплощенного углерода прямо из Revit