Опубликуйте свои продукты
ARMATHERM™ 500 SERIES - Column Base (US)

ARMATHERM™ 500 SERIES - Column Base (US)

Armatherm™ 500 - Column Base

Reducing heat flow within a building’s thermal envelope reduces energy consumption as well as potential condensation issues. Armatherm™ 500 thermal break material (TIM) significantly reduces energy lost from thermal bridging in building envelope connections.

Armatherm™ 500 structural thermal break material is a high density, thermoset polyurethane manufactured in several densities.

Armatherm™ 500 thermal break material can support high loads and has a selection of four grades of material with different compressive strength capabilities.

The Armatherm™ 500 thermal insulation blocks have very limited creep under load, plus they do not absorb water because of their closed cell structure. Therefore, energy lost via thermal bridging is reduced within building envelope connections. Heat flow, energy consumption and potentially dangerous condensation issues are all minimised as a result.

The standard thicknesses Armatherm™ 500 is available in are 5mm, 10mm, 12mm, 15mm, 20mm, 25mm, 50mm. Furthermore, the high density, polyurethane material sheets can be layered or customised with ease to achieve the desired U value and thickness specifications. It is extremely dynamic and can be used across the building, wherever features a penetration or transition exit through a building envelope. It can be cut and drilled on site easily, where a thermal bridge occurs, if necessary. Armatherm™500-320 and Armatherm ™500-490 are the most common specifications.

Not only is Armatherm™500 the ideal solution to prevent thermal bridging in buildings to reduce heat loss, it is also suitable for cold storage facilities to prevent the subgrade from freezing. This is necessary for frozen food storage, Armatherm™500 sits directly under the column base to prevent the transfer of cold temperatures into the ground.

Column Base Thermal Bridging Solution

Internal steel columns traditionally extend through the building envelope floor slab and insulation at their base. In low temperature buildings such as freezer rooms and cold storage facilities, this creates a thermal bridge and point transmittance (heat loss) at the steel column base. This is also the case for exterior columns which support floors or roof overhangs. The column to roof connection interrupts the continuous insulation creating heat loss due to thermal bridging.

Cпецификация
  • Specifications of Armatherm™ 500 Series 500-080 500-150 500-200 500-280
    Compressive Strength (psi) 210 560 1100 2150
    Compressive Modulus (psi) 6155 18130 29000 49300
    Sheer strength (psi) 145 167 257 310
    Thermal Conductivity (BTU in/hr ft 2F) 0.26 0.32 0.39 0.53
    R Value per Inch 3.85 3.1 2.6 1.9
    Operating Temperature (°F) -300 -300 -300 -300



    thermal break, balcony, parapet, column base, shelf angle, curtain wall, insulation pad, structural thermal break, Armatherm, thermal bridging, psi-value, U-value, energy code, envelope detailing

Техническая спецификация
  • Уникальная ссылкаarmatherm-500-series-column-base
  • Тип продукцииArmatherm™ 500
  • Группа продукцииStructural Thermal Break
  • ТипСтроительные материалы
  • Дата публикации2025-07-10
  • Номер версии1
Связанные
  • Основной материалПолиуретан
  • Разработано вСоединенные Штаты Америки
  • Страна-производительСоединенные Штаты Америки
Классификация
  • Категория BIMobjectСтроительные материалы - Изоляция
  • Классификация IFCСтруктурное соединение
  • Код ETIMEC000406
  • Название ETIMThermal insulation
  • Код Uniclass 2015Pr_35_90_15_89
  • Описание Uniclass 2015Thermal break connection plates
  • Код CSI MasterFormat 201407 21 00
  • Заголовок CSI MasterFormat 2014Thermal Insulation
  • Номер OmniClass23-13 25 19
  • Наименование OmniClassThermal Insulation 

Доступно в регионах:

Северная Америка Южная Америка
Ангилья
Аргентина
Антигуа и Барбуда
Боливия
Аруба
Бразилия
Багамы
Венесуэла
Барбадос
Гайана
Белиз
Колумбия
Бермуды
Парагвай
Бонэйр
Перу
Британские Виргинские острова
Суринам
Виргинские Острова
Уругвай
Гаити
Фолклендские острова
Гваделупа
Французская Гвиана
Гватемала
Чили
Гондурас
Эквадор
Гренада
Гренландия
Доминика
Доминиканская Республика
Канада
Коста-Рика
Куба
Кюрасао
Мартиника
Мексика
Монтсеррат
Никарагуа
Острова Кайман
Острова Теркс и Кайкос
Панама
Пуэрто-Рико
Сальвадор
Сен-Бартелеми
Сен-Мартен
Сен-Пьер и Микелон
Сент-Винсент и Гренадины
Сент-Китс и Невис
Сент-Люсия
Синт-Мартен
Соединенные Штаты Америки
Тринидад и Тобаго
Ямайка