Sound Silencer™ - Ceiling Tiles - Fiber Free and Cleanable

SECTION 09 51 23

Sound Silencer^TM Acoustic Ceiling Tiles

PART 1 GENERAL

1. SECTION INCLUDES
   1. Sound Silencer^TM Ceiling Tiles.
2. REFERENCES
   1. American Society for Testing and Materials (ASTM)
      1. ASTM E84: Standard Test Method for Surface Burning Characteristics of Building Materials.
      2. ASTM E90: Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
      3. ASTM C423: Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method.
      4. ASTM E795: Standard Practices for Mounting Test Specimens During Sound Absorption Tests
   2. International Code Council (ICC)
      1. ICC IBC: International Building Code
3. SUBMITTALS
   1. Product Data: Manufacturer’s data sheet and installation instructions.
   2. Samples: Submit, at minimum, a 4” x 4” sample for each type of specified acoustical tile.
   3. Test Reports: Upon request, submit certified test reports to verify specified product performance.
4. QUALITY ASSURANCE
   1. Qualifications:
      1. Manufacturers: Provide acoustical ceiling tiles from a single manufacturer.
      2. Installers: Utilize an installer having demonstrated experience on projects of comparable size and complexity.
   2. Performance Requirements:
      1. Surface Burning Characteristics: Acoustical tiles to perform as specified when tested in accordance with ASTM E84. Acoustical tile surface burning performance should comply with the International Building Code and other local building code requirements.
      2. Acoustical Characteristics: Acoustical tiles to perform as specified when tested in accordance with ASTM C423 and ASTM E90.
5. DELIVERY, STORAGE, AND HANDLING
   1. Storage and Handling Requirements:
      1. Handle tiles carefully to avoid any damage.
      2. Store tiles indoors in a clean, cool, dry place, and out of direct sunlight.
      3. Store tiles in a space where the ambient temperature and humidity conditions are being maintained at the levels indicated for the project when occupied for its intended use.
6. SITE CONDITIONS
   1. Ambient Conditions:
      1. Maintain ambient temperature and humidity conditions at levels indicated for the project when occupied for its intended use.
      2. Do not install products under environmental conditions outside manufacturer’s recommended limits.
   2. Existing Conditions: Do not install ceiling tiles until space is enclosed and weather proofed, wet work is completely dry, and work above ceilings is complete.
7. WARRANTY
   1. Provide manufacturer’s written product warranty per Section 01 77 00 – Closeout Procedures.

PART 2 PRODUCTS

(Specifier Note: Red colored text below requires you to select an option before this specification can be completed. Options in red text are bound by parenthesis. Additional Sound Silencer Ceiling Tile information can be found on our website: www.acousticalsurfaces.com

1. MANUFACTURERS
   1. Acoustical Surfaces, Inc., 123 Columbia Court N, Chaska, MN 55318.
      Phone: 952-448-5300. Fax: 952-448-2613. Website: www.acousticalsurfaces.com
2. DESCRIPTION
   1. Product: Sound Silencer^TM Ceiling Tiles by Acoustical Surfaces, Inc.
   2. Product Options:
      1. Tile Composition: Semi-rigid porous expanded polypropylene acoustical bead foam
      2. Tile Thickness: (1”) / (2”)
      3. Tile Size: (23-3/4” x 23-3/4”) / (23-3/4” x 47-3/4”)
      4. Edge Profile: Square
      5. Finish: (Charcoal) / (White)
      6. Mounting Method: Lay-in
   3. Product Performance:
      1. Acoustical Performance
         1. Noise Reduction Coefficient (NRC) per ASTM C423

1. Sound Transmission Classification (STC) per ASTM E90

1. Surface Burning Performance
   1. Fire Rating per ASTM E84: Class A.

PART 3 EXECUTION

1. EXAMINATION
   1. Verification of Conditions:
      1. All wet work in the installation area must be complete, cured, and dry prior to installation.
      2. Work above ceilings shall be complete, inspected, and accepted before ceiling work begins.
2. INSTALLATION
3. Comply with manufacturer’s instructions and recommendations for installation of ceiling tiles and with industry standards.
4. CLEANING
5. Clean surfaces of ceiling tiles per manufacturer’s instructions or recommendations.
6. Remove and replace damaged or discolored material and material that cannot be properly cleaned.
7. PROTECTION
8. Protect installed work from damage due to subsequent construction activity, including temperature and humidity limitations and dust control, so that the work will be without damage and deterioration at the time of acceptance by the owner.

END OF SECTION

Keywords:
acoustic ceiling tiles
washable ceiling panels
water-resistant acoustics
polypropylene ceiling tiles
drop ceiling noise control
hygienic acoustic tiles
cleanable ceiling tiles
replacement ceiling tiles
restaurant ceiling tiles
kennel ceiling tiles
lightweight ceiling tiles
acoustical ceiling tiles
abuse-resistant ceiling tiles
fiber-free ceiling tiles
Sound Silencer polypropylene ceiling tiles
non-fibrous acoustical ceiling panels
washable acoustic ceiling tiles
impact-resistant ceiling panels
indoor/outdoor acoustical ceiling tiles
Class A fire-rated polypropylene tiles
lightweight acoustic ceiling panels
durable soundproofing ceiling tiles
high NRC ceiling tiles for echo and reverberation control
moisture-resistant and washable acoustic solution
odor-resistant polypropylene ceiling panels
safe, non-toxic, non-fibrous acoustical treatment
ideal for high-humidity and sanitary environments
fire-rated for safety compliance
fiber-free ceiling tiles for clean environments
color options for Sound Silencer ceiling tiles
custom sizes for drop ceiling grids
decorative acoustic ceiling panels for modern interiors
smooth, cleanable polypropylene finish
architectural acoustic design elements
modular ceiling tile systems for flexible layouts
acoustic ceiling tiles for restaurants and hospitality spaces
sound absorption panels for kennels and animal hospitals
noise control for food prep areas and kitchens
ceiling tiles for schools, classrooms, and cafeterias
industrial and commercial spaces with high noise levels
server rooms and data centers acoustic ceiling panels
easy-to-install ceiling tiles for standard grids
lightweight panels for quick replacement
washable and low-maintenance acoustic solution
safe for high-traffic and sanitary environments
fire-rated polypropylene finish for code compliance
Sound Silencer polypropylene acoustic ceiling tiles for restaurants
moisture-resistant ceiling panels for food prep areas
odor-resistant acoustic ceiling tiles for kitchens and cafeterias
Class A fire-rated polypropylene ceiling tiles for indoor/outdoor use
cleanable non-fibrous acoustic ceiling tiles for sanitary spaces
affordable polypropylene acoustic ceiling tiles for large rooms
modular ceiling tile systems for echo reduction
custom-size Sound Silencer ceiling tiles for architectural design