TEROSON AD KDS

Traduzido pelo Google,

TEROSON AD KDS é um adesivo monocomponente de cura por umidade e endurecimento rápido, baseado em polímero MS que cura
em contato com a umidade atmosférica. A cura pode ser acelerada aumentando a temperatura e a umidade do ar.

Polímero especial para a colagem universal de sistemas de fitas de vedação na área de instalação de janelas/fachadas e construção metálica.

Unidade: saco tubular de 570 ml

Especificação

Properties:
- Excellent adhesion without primer on most building materials
- UV- and weather-resistant
- Gap-bridging up to 20 mm
- Can be used down to -5 °C
- Strip position easily adjustable in the fresh adhesive bed
Approvals:
- EMICODE EC 1 Plus
Technical descriptions:
- Material base: Silane-modified polymer
- Consistency: Paste-like, thixotropic
- Colour: Black
- Odour: Odourless
- Packaging: 570 ml in a tubular bag
- Density: (DIN 53 217, part 2) 1.5 g/cm³
- Skin formation time: (acc. to ISO 2091 at 23 °C & 50 % RH) Approx. 15 min
- Curing rate: (at 23 °C & 50 % RH) 2 mm/24 h
- Shore A hardness: (acc. to ISO 868) Approx. 25
- Tensile strength: (acc. to ISO 37) 0.8 MPa
- Elongation at break: (acc. ISO 8339-A) Approx. 250 %
- Modulus at 100% elongation: (acc. to ISO 8339-A) Approx. 0.5 MPa
- Paint adhesion: provided
- Application temperature: -5 °C to +40 °C
- Temperature resistance: (Short-term exposure up to 1h): -40 °C to +100 °C +120 °C
- Fire resistance: (acc. to DIN EN 13501-1) Class E
Installation instructions:
Apply strands of TEROSON AD KDS to the substrate using either a manual or a compressed air gun (pressure 0.5 to 5 bars). Afterwards, press the sealing strip into the adhesive paste while it is
still fresh and skin-free. Roll the strip over with a pressure roller. On very uneven substrates, TEROSON AD KDS can be used to fix the upper edge of the TEROSON FO 2 sealing strip and to seal it against water penetrating from behind.TEROSON AD KDS should not be used below -5 °C and not above +40 °C (air/substrate).