The loudspeaker shall be self-powered and include a single 4 in (103 mm) diameter cone transducer with a 4 Ω, long-excursion voice coil.
The loudspeaker shall incorporate a class-D power amplifier with a burst capability of 220 W total (440 W peak) into a nominal load of 4 Ω. Distortion (THD, IM, TIM) shall not exceed 0.02 percent.
Performance specifications for a typical production unit shall be as follows: operating frequency range shall be120 Hz–18 kHz; phase response shall be 400 Hz– 20 kHz +/-45 degrees; linear peak SPL shall be 111.5 dB measured with M-noise, free field at 4 m referred to 1 m; coverage shall be 80degrees horizontal and 80 degrees vertical at 3–14 kHz +/-10 degrees.
The loudspeaker shall be equipped with a single SwitchCraft EN3 5-pin connector (two pins for DC power, three pins for balanced audio). The audio input shall be electronically balanced with a 10 Ω impedance and accept a nominal –2.5 dBV (0.75 V rms) input signal.
Power requirements for the loudspeaker shall be an external Meyer Sound power supply, such as the MPS-482HP or MPS‑488HP IntelligentDC. Loudspeaker components shall be housed in a sealed, extruded aluminum enclosure with a black anodized finish. Standard white and custom colors shall also be available. Dimensions with grille frame shall be W: 4.04 in (103 mm) x H: 4.04 in (103 mm) x D: 5.72 in (145 mm). Weight shall be 4.2 lb (1.9 kg). On each side of the enclosure, 0.375 in-16 inserts shall accommodate Meyer Sound mounting and rigging options.
The loudspeaker shall be the Meyer Sound MM-4XP.
Keyword: Loudspeaker, Loudspeakers