G-5000, G-5138 and G-5200 Steel Polyurethane-Injected Sectional Overhead Garage Door

Features and Benefits 

INSULATION

• G-5000: R-16 / G-5138: R-12 / G-5200: R-18

STEEL WALLS 

• 26/26-gauge, G60 hot-dipped galvanized steel with five coats of protective finish.

• Baked-on polyester paint. Can be repainted. 

• Woodgrain finish on both sides of the door. 

• Same quality of corrosion-resistant steel for interior and exterior faces.

HIGH-PRESSURE INJECTED POLYURETHANE

• Stronger and more energy-efficient insulation.

• Solidly bonded to the steel sheets providing a section that is resistant to flexion.

SEALED THERMO-PANE WINDOWS

• Optimize insulation and reduce seal failures with galvanized steel spacer technology.

• Ensure a long lasting and refined appearance with one-piece molded polypropylene window frame.

INTERLOK™ TRIPLE-CONTACT JOINTS

• Sections are strengthened by 2 steel walls joined together with mechanical interlocking joints which are more solid than just two bonded walls.

• Mechanical thermal breaks which are more efficient compared to thermal breaks made with glue.

• Triple-contact joints provide 2 times more weathertightness than those of the competition.

METAL REINFORCEMENT PLATES

• Provide stronger fastening for hinges and struts. These 14-gauge plates are 2 times thicker than 20-gauge plates used by other manufacturers.

WOOD END BLOCKS

• Provide a thermal break that is more effective than steel end caps which form a thermal bridge.

• Structural elements of the sections, the kiln-dried pine wood end blocks are installed at the outer ends of the section. They are stronger than insulation covered with a steel cap.

LAG SCREW SYSTEM

• Provides much better fastening of the end hinges. The lag screws engage 8 threads into the wood, compared to a self-tapping screw going through a steel end cap engaging only about 2 or 3 threads.