Vizogril - Fencing system

Standard: BS1722-14:2017

Product Reference: CLD Vizogril Rigid Mesh Panel System

Panel type: Electrofused steel grating consisting of vertical flat bars with horizontal wires. Top and bottom flat bars.

Panel width: 1992mm

Wire diameter: 25mm x 2mm vertical flat bars, 4.5mm horizontal wires. Tops and bottoms 25mm x 4mm flat bars.

Mesh size: 62 x 66mm

Height: 930mm, 1194mm, 1326mm, 1458mm, 1722mm, 1986mm, 2118mm or 2514mm (fencing can be made up of any combination of these sizes)

Nominal height: 1.0, 1.2m, 1.4m, 1.5m, 1.8m, 2.0m, 2.2m or 2.6m

Finish: Polyester powder-coated to 60-80 microns or 160-200 microns with marine grade and metallics. Any RAL colour available

Top edge projection: nil

Panel installation: Bottom of panel approx 40mm above ground 

Posts: RHS or SHS, depending on application galvanised after manufacture and polyester powder-coated to match fencing

Post dimensions: Depending upon application

Maximum post

Centres: Depending on post section

Fixings: Depending on application – please contact CLD Fencing Systems for full details.

Foundations: Set posts in holes 300mm diameter x 800mm deep (adjust according to fence height) Note: contractor/ client is responsible for the foundation size suitable for the ground conditions

Warranty: Minimum of 15 years against manufacturing defects.

Notes: All dimensions are nominal, for further information please contact CLD Fencing Systems.

Information is correct at time of production. As part of our policy of continuous improvement, we reserve the right to alter product specification without notice.

To be read in conjunction with Preliminaries/General conditions