Acousti-Board Ultra - Natural Fiber Soundproof Backer and Tackboard

SECTION 09 84 33

Acousti-Board Ultra Soundproofing Backer Wall Panels

PART 1 GENERAL

1. SECTION INCLUDES
   1. Acousti-Board Ultra soundproofing backer wall panels.
2. REFERENCES
   1. American Society for Testing and Materials (ASTM)
      1. ASTM C423: Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method.
      2. ASTM E84: Standard Test Method for Surface Burning Characteristics of Building Materials.
      3. ASTM E90: Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements.
      4. ASTM E795: Standard Practices for Mounting Test Specimens During Sound Absorption Tests
   2. International Code Council (ICC)
      1. ICC IBC: International Building Code
3. SUBMITTALS
   1. Product Data: Manufacturer’s data sheet and installation instructions.
   2. Samples: Submit, at minimum, a 4” x 4” sample for each type of specified acoustical panel.
   3. Test Reports: Upon request, submit certified test reports to verify specified product performance.
4. MAINTENANCE MATERIAL
5. Extra Materials:
   1. Deliver no less than two percent (2%) / (Other) of each type, color and pattern of material.
   2. Extra materials shall be from the same production run as the original materials.
   3. Extra materials shall remain in the manufacturer’s original packaging and given to the building owner upon substantial completion of the work. Store extra materials per instructions as described in storage and handling requirements.
6. QUALITY ASSURANCE
   1. Qualifications:
      1. Manufacturers: Provide acoustical wall panels from a single manufacturer.
      2. Installers: Utilize an installer having demonstrated experience on projects of comparable size and complexity.
   2. Performance Requirements:
      1. Surface Burning Characteristics: Acoustical panels to perform as specified when tested in accordance with ASTM E84. Acoustical panel surface burning performance should comply with the International Building Code and other local building code requirements.
      2. Acoustical Characteristics: Acoustical panels to perform as specified when tested in accordance with ASTM C423 and ASTM E90.
7. DELIVERY, STORAGE, AND HANDLING
   1. Storage and Handling Requirements:
      1. Handle panels carefully to avoid any damage.
      2. Store panels indoors in a clean, cool, dry place, and out of direct sunlight.
      3. Store panels in a space where the ambient temperature and humidity conditions are being maintained at the levels indicated for the project when occupied for its intended use.
8. SITE CONDITIONS
   1. Ambient Conditions:
      1. Maintain ambient temperature and humidity conditions at levels indicated for the project when occupied for its intended use.
      2. Do not install products under environmental conditions outside manufacturer’s recommended limits.
   2. Existing Conditions: Do not install wall panels until space is enclosed and weather proofed, and wet work is completely dry.
9. WARRANTY
   1. Provide manufacturer’s written product warranty per Section 01 77 00 – Closeout Procedures.

PART 2 PRODUCTS

(Specifier Note: Red colored text below requires you to select an option before this specification can be completed. Options in red text are bound by parenthesis. Additional Acousti-Board Ultra information can be found on our website

1. MANUFACTURERS
   1. Acoustical Surfaces, Inc., 123 Columbia Court N, Chaska, MN 55318.
      Phone: 952-448-5300. Fax: 952-448-2613. Website:
2. DESCRIPTION
   1. Product: Acousti-Board Ultra soundproofing backer wall panels by Acoustical Surfaces, Inc.
   2. Products Options:
      1. Panel Composition: 50% pre-consumer recycled synthetic fiber
      2. Panel Density: 13 lb pcf
      3. Panel Thickness: 1/2" ± 1/16”
      4. Panel Size: (2’ x 4’) / (4’ x 8’)
      5. Edge Detail: Square
      6. Mounting Method: (Adhesive) / (Mechanical Fastener)
   3. Product Performance:
      1. Acoustical Performance
         1. Noise Reduction Coefficient (NRC) per ASTM C423 – 0.50
         2. Sound Transmission Class (STC) per ASTM E90 – 15
      2. Surface Burning Performance
         1. Fire Rating per ASTM E84: Class A.

PART 3 EXECUTION

1. EXAMINATION
   1. Verification of Conditions:
      1. Examine surfaces scheduled to received furred out or directly attached acoustical units for unevenness, irregularities or dampness that would affect quality and execution of work.
      2. All wet work in the installation area must be complete, cured, and dry prior to installation.
      3. Wall assembly shall be complete, inspected, and accepted before wall work begins.
2. INSTALLATION
3. Comply with manufacturer’s instructions and recommendations for installation of wall panels and with industry standards.
4. CLEANING
5. Clean surfaces of wall panels per manufacturer’s instructions or recommendations.
6. Remove and replace damaged or discolored material and material that cannot be properly cleaned.
7. PROTECTION
8. Protect installed work from damage due to subsequent construction activity, including temperature and humidity limitations and dust control, so that the work will be without damage and deterioration at the time of acceptance by the owner.

END OF SECTION
 

Keywords:
CFAB compressed fiber acoustical drywall backer board
acoustic wall panels
sound absorption board
high-performance acoustics board
noise control panels
eco-friendly acoustic board
soundproof drywall backer
sound reducing backer board
tackable acoustic core board
recycled soundproofing backer board
drywall acoustic backer board
high NRC acoustical backer board
sound absorption and noise reduction drywall system
STC-rated acoustical drywall backer
impact-resistant acoustic board
tackable acoustical surface for pin-ups and displays
thermal insulation properties in backer board
durable compressed fiber acoustic board
mold and mildew resistant acoustical backer
fire-rated acoustic drywall backer board
cost-effective noise control solution
eco-friendly compressed fiber acoustic board
made from recycled materials
sustainable acoustical drywall solution
green building acoustic backer board
LEED credit contributing acoustical board
low VOC acoustic wall panels
environmentally responsible soundproofing board
healthy indoor environment acoustic solution
acoustic backer board for drywall assemblies
soundproofing board for residential walls
noise control panels for commercial buildings
acoustic board for schools and classrooms
compressed fiber board for offices and conference rooms
acoustical drywall backer for home theaters
sound reducing board for apartments and condos
tackable acoustic board for multipurpose rooms
industrial noise control backer board
easy-to-install acoustical drywall backer board
compatible with standard drywall assemblies
field-cuttable compressed fiber acoustic board
lightweight yet durable acoustic backer
tackable surface for pins, staples, and adhesives
available in multiple thicknesses and sizes
hidden behind drywall once installed
resilient and long-lasting acoustic board
eco-friendly compressed fiber acoustical drywall backer board for residential soundproofing
sound absorption board for commercial drywall assemblies
high NRC acoustical backer board for schools and classrooms
STC-rated acoustic drywall backer for apartments and condos
tackable acoustic core board for multipurpose spaces
recycled soundproofing backer board for sustainable construction projects
fire-rated compressed fiber acoustic board for commercial buildings
cost-effective acoustical drywall backer for noise control
durable acoustic backer board for home theaters
compressed fiber acoustic board for industrial noise reduction