Opublikuj swoje produkty
Rada Tec 1000T Waschtisch-Thermostatarmatur
RADA

Rada Tec 1000T Waschtisch-Thermostatarmatur

CHARACTERISTICS Optoelectronic thermostatic mixer for washbasins Power supply via 6V lithium battery For standard tap hole with Ø35mm Automatic shutdown when the battery voltage is low Hygiene flushing function every 24 hours for 1 minute Adjustable run-on time Flow rate 6 l / min at 3 bar DESCRIPTION Electronic thermostatic basin mixer with infrared sensor, with thermostat for individual temperature selection and automatic hygiene flushing function every 24 hours for 1 minute, with 6 V battery type CRP2
Opis
  • • Fitting body: chrome-plated brass • Internal components: stainless steel, brass, plastic • Connection hoses: Flexible connection hoses made of. Stainless steel with silicone inner tube 3/8 ”, DN10 union nuts • Cold water: 5 - 20 ° C • Hot water: 50 - 70 ° C (briefly up to 85 ° C) • Minimum line pressure: 0.5 bar • Maximum line pressure: 5 bar • Volume flow: 6 l / min at 3 bar • Runtime: depending on the dwell time in the detection range of the infrared sensor • Follow-up time: 1 second (factory setting). 0.3 - 11 seconds (in 12 steps) • Anti-blocking time, automatic switch-off after 2 minutes • Sensor range: 140mm ± 5% adjustable 50 - 200mm (in 24 steps) • Short-term: continuous run 120 seconds • Ambient temperature: 4 - 60 ° C • Protection class: IP65 according to EN60529
Specyfikacja techniczna
  • Nr referencyjny21930057
  • Rodzina produktuSanitary
  • Grupa produktuWashstand
  • TypObiekt (jeden obiekt)
  • Data publikacji2025-10-29
  • Numer edycji1
Dodatkowe informacje
  • Materiał głównyMosiądz
  • Materiał dodatkowyStal nierdzewna
  • Zaprojektowano wNiemcy
  • Wyprodukowano wNiemcy
Klasyfikacja
  • Kategoria BIMobjectUrządzenia sanitarne - Umywalki
  • Klasyfikacja IFCObiekt

Dostępny w krajach:

Europa
Belgia
Holandia
Niemcy
Wielka Brytania
Common.Footer.ValueProp.Image.AltText

Aplikacja Design App dla Revit

Wczytaj rodziny bezpośrednio do modelu Revit jednym kliknięciem

Zyskaj łatwiejszy dostęp do nowych obiektów, przechowuj rodziny Revit i współpracuj ze swoim zespołem.

  • Zaznacz pole wyboruPracuj bezpośrednio z obiektami BIM obok Revit
  • Zaznacz pole wyboru 2 GB miejsca w chmurze — przechowuj zawartość Revit
  • Zaznacz pole wyboru Uzyskaj wbudowany węgiel LCA (A1-A3) bezpośrednio z Revit