119 gallon storage tank

Residential / commercial glass-lined 119G storage tank

Opis

Construction
The tank shall be manufactured from mild steel with
a baked on Cobalt enriched porcelain glass lining
Tank outer shell shall be steel with a baked on
powder coating for protection
The ECO-119GLBB Tank is only certified for Indoor
installation, it should not be located external to the building

Insulation
2" of High R value foam insulation will be sprayed on to the
bare shell of the tank to reduce heat loss

Connections
Connections to the Hot and Cold building supplies shall be
1 1/2" NPT Female type
Connections to the Hot and Cold piping to the Heat Pump
shall be 3/4" NPT Female type
Cold Water Piping from Storage Tank to Heat Pump
and return of Hot Water piping from Heat Pump to Tank
shall be 1/2" Copper or PEX.
2 of 4" long 3/4" Male x 3/4" Male connections will be boxed
which shall be located at the base of the ECO-119GLBB
2 x Magnesium anode rods shall be installed internally

Controls
The tank shall be supplied with a Temperature sensor
installed in a sensor well to control the GS5-45HPC & -D
Additional GS Heat Pumps connected to a tank shall
require an individual Temperature sensor
Tank Sensor wiring to the GS Heat Pump will be 18-2AWG
Two additional Thermowells are supplied with the Tank at
the Top and Bottom levels of the Tank so that a Controller
to provide Demand Response signals can be used

Pressure and Temperature Relief
Tank shall be supplied with a factory installed
ASME certified Pressure and Temperature Relief valve
Settings shall be at 150 Psig for Presssure and
210°F for Temperature

Specyfikacja techniczna

Nr referencyjny119-gallon-storage-tank
Rodzina produktuResidential Tanks
Grupa produktuECO-119GLBB
TypObiekt (jeden obiekt)
Data publikacji2025-09-05
Numer edycji1
Wysokość (cale)63.57
Szerokość (cale)28
Głębokość (cale)28

Linki

Url produktuhttps://eco2waterheater.com/wp-content/uploads/2024/08/SAN-119GLBK-Tank-Submittal-07-2024.pdf
Instrukcja montażuhttps://eco2waterheater.com/wp-content/uploads/2024/08/SAN-119GLBK-Tank-Submittal-07-2024.pdf
Certyfikacja produktuhttps://eco2waterheater.com/wp-content/uploads/2024/08/SAN-119GLBK-Tank-Submittal-07-2024.pdf
Opis technicznyhttps://eco2waterheater.com/wp-content/uploads/2024/08/SAN-119GLBK-Tank-Submittal-07-2024.pdf

Dodatkowe informacje

Materiał głównyStal węglowa
Materiał dodatkowyGranulat szkła
Zaprojektowano wStany Zjednoczone
Wyprodukowano wStany Zjednoczone
Waga netto (lbs)345

Klasyfikacja

Kategoria BIMobjectHVAC - Podgrzewacze wody
Klasyfikacja IFCGrzejnik elektryczny
Kod ETIMEG000043
Nazwa ETIMResidential heating
Uniclass 2015 CodePr_60_60_96
Uniclass 2015 DescriptionWater heaters
CSI MasterFormat 2014 Code22 33 36.16
CSI MasterFormat 2014 TitleCommercial Storage Electric Domestic Water Heaters
OmniClass Number23-31 29 00
OmniClass TitleHot Water Heaters

Dostępny w krajach:

Ameryka północna
Anguilla
Antigua i Barbuda
Aruba
Bahamy
Barbados
Belize
Bermudy
Brytyjskie Wyspy Dziewicze
Curaçao
Dominika
Dominikana
Grenada
Grenlandia
Gwadelupa
Gwatemala
Haiti
Holandia Karaibska
Honduras
Jamajka
Kajmany
Kanada
Kostaryka
Kuba
Martynika
Meksyk
Montserrat
Nikaragua
Panama
Portoryko
Saint Kitts i Nevis
Saint Lucia
Saint Martin
Saint Vincent i Grenadyny
Salwador
Sint Maarten
Stany Zjednoczone
Trynidad i Tobago
Turks i Caicos
Wspólnota Saint-Barthélemy
Wspólnota Terytorialna Saint Pierre i Miquelon
Wyspy Dziewicze