Opublikuj swoje produkty
RO-E - Reverse Osmosis
RO-E - Reverse Osmosis
    Condair

    RO-E - Reverse Osmosis

    Reverse osmosis (RO) is an effective and economic way of removing minerals from water. The Condair RO-E has been developed specifically to provide operational, energy and maintenance benefits to Condair humidifiers.

    By removing the minerals from a humidifier’s supply water, the limescale that builds-up in the system is virtually eliminated. This results in a much lower level of required maintenance in all types of humidifier and reduced energy consumption in steam humidifiers.

    Steam humidifiers that run on mains water need to drain their boiling chambers occasionally to maintain a low mineral content and reduce limescale build-up. By using RO supply water, the steam humidifier’s boiling chamber does not require this regular drain. Therefore it uses less energy to maintain the water’s temperature.

    As the water temperature is consistent, the steam output is also consistent, thus improving humidity control. By using resistive steam humidifiers fed by RO water, ±1%RH control can be achieved.

    Other benefits of using RO water with humidifiers include increasing the life of the evaporative pads in evaporative humidifiers and preventing dust carry-over in spray humidifiers.

    Opis
    • Condair RO-E 

      • Voltage: 230V 
      • Frequency: 50 Hz


      Options:

      • All models show the optional housing cover


      Version:

      • Version + is for use with adiabatic humidifiers
      • Models with safety valve are mandatory for CE markets. Note: RO-E 200 and 300 require the safety valve by the external pressure tank. Please consider the instruction in the installation manual! 


      RO-E 40

      Pure water output at 5 °C water temperature against 1 bar: 58 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 98 l/hr


      RO-E+ 40 (for adiabatic humidifiers)

      Pure water output at 5 °C water temperature against 1 bar: 36 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 59 l/hr


      RO-E 100

      Pure water output at 5 °C water temperature against 1 bar: 105 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 181 l/hr


      RO-E+ 100 (for adiabatic humidifiers)

      Pure water output at 5 °C water temperature against 1 bar: 67 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 114 l/hr


      RO-E 200

      Pure water output at 5 °C water temperature against 1 bar: 200 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 352 l/hr


      RO-E+ 200 (for adiabatic humidifiers)

      Pure water output at 5 °C water temperature against 1 bar: 124 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 218 l/hr


      RO-E 300

      Pure water output at 5 °C water temperature against 1 bar: 285 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 513 l/hr


      RO-E+ 300 (for adiabatic humidifiers)

      Pure water output at 5 °C water temperature against 1 bar: 171 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 312 l/hr

    Specyfikacja techniczna
    • Nr referencyjnycondair-ro-e
    • Rodzina produktuWater Treatment
    • Grupa produktuReverse Osmosis
    • TypObiekt (jeden obiekt)
    • Data publikacji2025-10-02
    • Numer edycji1
    • Wysokość (mm)792
    • Szerokość (mm)587
    • Głębokość (mm)484
    Dodatkowe informacje
    • Materiał głównyStal malowana proszkowo
    • Zaprojektowano wSzwajcaria
    • Wyprodukowano wNiemcy
    Klasyfikacja
    • Kategoria BIMobjectHVAC - HVAC - pozostałe
    • Klasyfikacja IFCFiltr
    • Uniclass 2015 CodePr_60_55_97_72
    • Uniclass 2015 DescriptionReverse osmosis units
    • OmniClass Number23-39 41 13 15
    • OmniClass TitleReverse Osmosis and Nanofiltration Membrane Equipment

    Dostępny w krajach:

    Ameryka Południowa Europa Oceania Azja Afryka
    Argentyna
    Austria
    Australia
    Chiny
    Republika Południowej Afryki
    Chile
    Belgia
    Nowa Zelandia
    Indie
    Urugwaj
    Bułgaria
    Indonezja
    Chorwacja
    Izrael
    Czechy
    Pakistan
    Dania
    Singapur
    Estonia
    Tajlandia
    Finlandia
    Turcja
    Francja
    Grecja
    Hiszpania
    Holandia
    Irlandia
    Islandia
    Litwa
    Łotwa
    Niemcy
    Norwegia
    Polska
    Portugalia
    Rumunia
    Serbia
    Słowacja
    Słowenia
    Szwajcaria
    Szwecja
    Ukraina
    Węgry
    Wielka Brytania
    Włochy
    Common.Footer.ValueProp.Image.AltText

    Aplikacja Design App dla Revit

    Wczytaj rodziny bezpośrednio do modelu Revit jednym kliknięciem

    Zyskaj łatwiejszy dostęp do nowych obiektów, przechowuj rodziny Revit i współpracuj ze swoim zespołem.

    • Zaznacz pole wyboruPracuj bezpośrednio z obiektami BIM obok Revit
    • Zaznacz pole wyboru 2 GB miejsca w chmurze — przechowuj zawartość Revit
    • Zaznacz pole wyboru Uzyskaj wbudowany węgiel LCA (A1-A3) bezpośrednio z Revit